Electric automatic operation, no compressor required
Safety activation using two side buttons
Screen control panel to programme and control time, temperature, distance between platens and sleep mode activation time
Counter for pressings completed
Features an energy-saving system with automatic shutdown as a safety protection
Base platen with silicone pad for even distribution of pressure and temperature
Magnetic lock to prevent the lower platen from sliding during transfer
Thermal sensor on the heat platen to detect overheating
Sturdy structure with a scratch-resistant coating
Certifications: EMC, MD, Rohs in accordance with CE
KEEP IN MIND
For transport safety, you will receive the press with the red emergency button locked. Before turning it on, you must release the button by turning it to the right
The heat platen is not interchangeable, except in case of a fault
Available in two formats depending on the type of installation:
Anchored to the ironing board structure using a clamp (Ref. 055432)
Tabletop, 50 cm high with separate base (Ref. 056500)
Ideal for serial ironing with greater agility and precision
4 light beams that mark the exact position for placing the object on the base plate
Each beam has an adjustment wheel for manually adjusting its position
DTF Curing Tray (Ref. 056707)
Facilitates the DTF film curing process without needing to adjust the height of the heat platen
Edge with a 1 cm pad that prevents direct contact of the heat platen with the DTF film during curing
It is placed directly on the base platen, with the holes facing inwards. No installation required
40 x 50 cm tray with a rectangular gap to place it without it hitting the press structure. It incorporates holes for hanging and an edge on the back that acts as a stop on the base platen
Curing area: 36 x 48.5 cm
Lower Heat Platen (Ref. 056706)
Platen size: 40 x 50 cm
Heating area: 38 x 38 cm
Applies heat from below, improving thermal transfer and reducing pressing time
Facilitates adhesion on thick, multi-layered, or textured materials
Suitable for thick vinyls, 3D, patches... Improves adhesion and prevents design deformation
Time and temperature controller for the lower platen
Includes a Teflon cover and a protective 38 x 38 cm silicone pad
INTERCHANGEABLE BASE PLATENS
Simple fixing with manual screws
Made of cast aluminium
Get other sizes and shapes to customise different items:
Labels: small fabrics such as patches, fabric labels, handkerchiefs...
Sleeves: suitable for threading t-shirt sleeves
Trousers: suitable for any leg length
Small garments: suitable for baby clothes, bandanas... or rigid items
Trainers: allows for the customisation of 2 trainers at once
Plates: sized for flat plates up to Ø18 cm
Caps: suitable for printing 4 caps at the same time
T-shirts: T-shirt-shaped structure. Includes Teflon cover
Polo shirts: with a groove to place shirt buttons and collars. Includes Teflon cover
2 sleeves: facilitates the printing of 2 sleeves at once. Includes Teflon cover
4 in 1: platen with grooves for printing garments with zips or buttons, such as jackets, shirts, polo shirts, and even labels
Can coolers: can customise 8 can coolers, or similar items, at once. Does not include a silicone pad to facilitate full printing of the coolers
Drying platen: for use in techniques such as drying DTG and screen printing inks or curing in DTF and DTG. Iron structure with ventilation holes and a porous foam pad that facilitates breathability
BASE PLATEN MEASUREMENTS
Ref.
036186
036188
036187
036189
036190
053435
053437
053436
055428
055430
056313
053438
053592
Model
Labels
1 sleeve
Trousers
Small garments
Trainers
Plates (round)
Caps
T-shirts
Polo shirts
2 sleeves
4 in 1
Can coolers
Drying
Base platen (cm)
12 x 12
12 x 45
18 x 38
30 x 35
14 x 34
Ø18 x 2
38 x 38
40 x 50
40 x 50
40 x 50
40 x 50
40 x 50
40 x 50
Platen thickness (cm)
2
2
2
2
2
1.5
4.5
1.5
1.5
1.5
2
0.4
3
Pad
Silicone
Silicone
Silicone
Silicone
Silicone
Open Cell
Open Cell
Open Cell
Open Cell
Open Cell
Open Cell
Not included
Porous foam silicone
Cover included
No
No
No
No
No
No
No
Yes
Yes
Yes
No
No
No
Pad thickness (mm)
8
8
8
8
8
8
8
8
8
8
8
-
12
TECHNICAL DATA
Press model
Brildor XH-B2N 40x50cm
Press type
Automatic/Swing-away
Base platen type
Pull-out
Actuation
Electric motor
Controller
LCD digital display
Base platen measurements (cm)
40 x 50
Maximum thickness for pressing (cm)
5
Pad thickness (cm)
1
Side opening angle (°)
145
Maximum pressure (kg | bar)
360 | 5
Voltage (V)
220 - 240
Power (W)
2000
Timer (Sec)
0-999
Temperature range (°C | °F)
232 | 450
Temperature accuracy (°C)
±2
Maximum time for sleep mode activation (min)
120
PRECAUTIONS
Check the voltage before turning on the press
For your safety, make sure the plug is earthed
Turn off the machine when not in use and unplug it from the power socket
Keep children away from the machine
Protect your hands with gloves during work operations
Do not attempt to press objects that could melt or burn
If the control panel shows "000", contact technical service: thermal sensor error
HOW TO ADJUST THE PRESSURE ON THIS PRESS?
Here is an explanatory video on how to adjust the pressure for pressing or curing with the HB2N press.
https://www.brildor.com/en/swing-away-heat-press-machine-with-slide-out-drawer-interchangeable-platens-brildor-xh-b2n-40x50cm-automatic27016Automatic Swing Away Heat Press with Slide Out Drawer & Interchangeable Platens - Brildor XH-B2N - 40x50cm<p class="enlace"><a id="saber-mas"></a> </p>
<h2>More information about the Automatic Swing Away Heat Press with Slide Out Drawer & Interchangeable Platens - Brildor XH-B2N - 40x50cm</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Keep in mind</a></p>
<p>> <a href="#saber-mas3">Manual</a></p>
<p>> <a href="#saber-mas5">Press Measurements</a></p>
<p>> <a href="#saber-mas8">Accessories</a></p>
<p>> <a href="#saber-mas6">Interchangeable base platens</a></p>
<p>> <a href="#saber-mas7">Base platen measurements</a></p>
<p>> <a href="#saber-mas10">Technical data</a></p>
<p>> <a href="#saber-mas4">Precautions</a></p>
<p>> <a href="#saber-mas11">How to adjust the pressure on this press?</a></p>
<p>> <a href="#saber-mas9">Warranty</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION<br></strong></p>
<ul>
<li>Electric automatic operation, no compressor required</li>
<li>Safety activation using two side buttons</li>
<li>Screen control panel to programme and control time, temperature, distance between platens and sleep mode activation time</li>
<li>Counter for pressings completed</li>
<li>Features an energy-saving system with automatic shutdown as a safety protection</li>
<li>Base platen with silicone pad for even distribution of pressure and temperature</li>
<li>Magnetic lock to prevent the lower platen from sliding during transfer</li>
<li>Thermal sensor on the heat platen to detect overheating</li>
<li>Sturdy structure with a scratch-resistant coating</li>
<li>Certifications: EMC, MD, Rohs in accordance with CE</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>KEEP IN MIND<br></strong></p>
<ul>
<li>For transport safety, you will receive the press with the red emergency button locked. Before turning it on, you must release the button by turning it to the right</li>
<li>The heat platen is not interchangeable, except in case of a fault</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>MANUAL</strong></p>
<p><a title="XH-B2N Press Instruction Manual (.pdf - 1 Mb)." href="https://www.brildor.com/media/upload/descargas/Instrucciones_de_uso_del_Controlador_Digital_%20IT9300.pdf" target="_blank" rel="nofollow noopener">XH-B2N Press Instruction Manual (.pdf - 1 Mb).</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas5"></a> </p>
<p><strong>PRESS MEASUREMENTS<br></strong></p>
<table>
<tbody>
<tr>
<td><strong>Press closed in initial position (cm)<br></strong></td>
<td class="azul-negrita">42.5 x 83 x 57.5</td>
</tr>
<tr>
<td><strong>Press with base platen extended (cm)<br></strong></td>
<td class="azul-negrita">42.5 x 123.5 x 57.5</td>
</tr>
<tr>
<td><strong>Press with heat platen rotated (cm)<br></strong></td>
<td class="azul-negrita">75.5 x 98.5 x 57.5</td>
</tr>
<tr>
<td><strong>Packaging (cm)<br></strong></td>
<td class="azul-negrita">53 x 91 x 67</td>
</tr>
<tr>
<td><strong>Net weight (kg)<br></strong></td>
<td class="azul-negrita">62</td>
</tr>
<tr>
<td><strong>Gross weight (kg)<br></strong></td>
<td class="azul-negrita">68</td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas8"></a> </p>
<p><strong>ACCESSORIES</strong></p>
<p><strong>Laser positioners - (Ref. 055432 and 056500)</strong></p>
<ul>
<li>Available in two formats depending on the type of installation:
<ul>
<li><strong>Anchored</strong> to the ironing board structure using a clamp (Ref. 055432)</li>
<li><strong>Tabletop</strong>, <span class="azul-negrita">50 cm</span> high with separate base (Ref. 056500)</li>
</ul>
</li>
<li>Ideal for serial ironing with greater agility and precision</li>
<li>4 light beams that mark the exact position for placing the object on the base plate</li>
<li>Each beam has an adjustment wheel for manually adjusting its position</li>
</ul>
<p> </p>
<p><strong>DTF Curing Tray (Ref. 056707)</strong></p>
<ul>
<li>Facilitates the DTF film curing process without needing to adjust the height of the heat platen</li>
<li>Edge with a <span class="azul-negrita">1 cm</span> pad that prevents direct contact of the heat platen with the DTF film during curing</li>
<li>It is placed directly on the base platen, with the holes facing inwards. No installation required</li>
<li><span class="azul-negrita">40 x 50 cm</span> tray with a rectangular gap to place it without it hitting the press structure. It incorporates holes for hanging and an edge on the back that acts as a stop on the base platen</li>
<li>Curing area: <span class="azul-negrita">36 x 48.5 cm</span></li>
</ul>
<p><strong>Lower Heat Platen (Ref. 056706)</strong></p>
<ul>
<li>Platen size:<span class="azul-negrita"> 40 x 50 cm</span></li>
<li>Heating area: <span class="azul-negrita">38 x 38 cm</span></li>
<li>Applies heat from below, improving thermal transfer and reducing pressing time</li>
<li>Facilitates adhesion on thick, multi-layered, or textured materials</li>
<li>Suitable for thick vinyls, 3D, patches... Improves adhesion and prevents design deformation</li>
<li>Time and temperature controller for the lower platen</li>
<li><span style="font-weight: 400;">Includes a Teflon cover and a protective <span class="azul-negrita">38 x 38 cm</span> silicone pad</span></li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas6"></a> </p>
<p><strong>INTERCHANGEABLE BASE PLATENS</strong></p>
<ul>
<li>Simple fixing with manual screws</li>
<li>Made of cast aluminium</li>
<li>Get other sizes and shapes to customise different items:
<ul>
<li>Labels: small fabrics such as patches, fabric labels, handkerchiefs...</li>
<li>Sleeves: suitable for threading t-shirt sleeves</li>
<li>Trousers: suitable for any leg length</li>
<li>Small garments: suitable for baby clothes, bandanas... or rigid items</li>
<li>Trainers: allows for the customisation of 2 trainers at once</li>
<li>Plates: sized for flat plates up to <span class="azul-negrita">Ø18 cm<br></span></li>
<li>Caps: suitable for printing 4 caps at the same time</li>
<li>T-shirts: T-shirt-shaped structure. Includes Teflon cover</li>
<li>Polo shirts: with a groove to place shirt buttons and collars. Includes Teflon cover</li>
<li>2 sleeves: facilitates the printing of 2 sleeves at once. Includes Teflon cover</li>
<li>4 in 1: platen with grooves for printing garments with zips or buttons, such as jackets, shirts, polo shirts, and even labels</li>
<li>Can coolers: can customise 8 can coolers, or similar items, at once. Does not include a silicone pad to facilitate full printing of the coolers</li>
<li>Drying platen: for use in techniques such as drying <span class="azul-brildor-negrita">DTG</span> and <span class="azul-brildor-negrita">screen printing </span>inks or curing in<span class="azul-brildor-negrita"> DTF</span> and<span class="azul-brildor-negrita"> DTG</span>. Iron structure with ventilation holes and a porous foam pad that facilitates breathability</li>
</ul>
</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas7"></a> </p>
<p><strong>BASE PLATEN MEASUREMENTS<br></strong></p>
<table>
<tbody>
<tr>
<td><strong>Ref.</strong></td>
<td style="text-align: center;"><strong>036186</strong></td>
<td style="text-align: center;"><strong>036188</strong></td>
<td style="text-align: center;"><strong>036187</strong></td>
<td style="text-align: center;"><strong>036189</strong></td>
<td style="text-align: center;"><strong>036190</strong></td>
<td style="text-align: center;"><strong>053435</strong></td>
<td style="text-align: center;"><strong>053437</strong></td>
<td style="text-align: center;"><strong>053436</strong></td>
<td style="text-align: center;"><strong>055428<br></strong></td>
<td style="text-align: center;"><strong>055430<br></strong></td>
<td style="text-align: center;"><strong>056313<br></strong></td>
<td style="text-align: center;"><strong>053438</strong></td>
<td style="text-align: center;"><strong>053592<br></strong></td>
</tr>
<tr>
<td><strong>Model<br></strong></td>
<td style="text-align: center;">Labels</td>
<td style="text-align: center;">1 sleeve</td>
<td style="text-align: center;">Trousers</td>
<td style="text-align: center;">Small<br>garments</td>
<td style="text-align: center;">Trainers</td>
<td style="text-align: center;">Plates<br>(round)</td>
<td style="text-align: center;">Caps</td>
<td style="text-align: center;">T-shirts</td>
<td style="text-align: center;">Polo shirts</td>
<td style="text-align: center;">2 sleeves</td>
<td style="text-align: center;">4 in 1</td>
<td style="text-align: center;">Can<br>coolers</td>
<td style="text-align: center;">Drying</td>
</tr>
<tr>
<td><strong>Base<br>platen (cm)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">12 x 12</span></td>
<td style="text-align: center;"><span class="azul-negrita">12 x 45</span></td>
<td style="text-align: center;"><span class="azul-negrita">18 x 38</span></td>
<td style="text-align: center;"><span class="azul-negrita">30 x 35</span></td>
<td style="text-align: center;"><span class="azul-negrita">14 x 34</span></td>
<td style="text-align: center;"><span class="azul-negrita">Ø18 x 2</span></td>
<td style="text-align: center;"><span class="azul-negrita">38 x 38</span></td>
<td style="text-align: center;"><span class="azul-negrita">40 x 50<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">40 x 50<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">40 x 50<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">40 x 50</span></td>
<td style="text-align: center;"><span class="azul-negrita">40 x 50</span></td>
<td style="text-align: center;"><span class="azul-negrita">40 x 50<br></span></td>
</tr>
<tr>
<td><strong>Platen<br>thickness (cm)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">2<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">2<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">2<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">2<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">2<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">1.5<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">4.5<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">1.5<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">1.5<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">1.5<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">2</span></td>
<td style="text-align: center;"><span class="azul-negrita">0.4<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">3<br></span></td>
</tr>
<tr>
<td><strong>Pad<br></strong></td>
<td style="text-align: center;">Silicone</td>
<td style="text-align: center;">Silicone</td>
<td style="text-align: center;">Silicone</td>
<td style="text-align: center;">Silicone</td>
<td style="text-align: center;">Silicone</td>
<td style="text-align: center;">Open Cell</td>
<td style="text-align: center;">Open<br>Cell</td>
<td style="text-align: center;">Open<br>Cell</td>
<td style="text-align: center;">Open<br>Cell</td>
<td style="text-align: center;">Open<br>Cell</td>
<td style="text-align: center;">Open<br>Cell</td>
<td style="text-align: center;">Not<br>included</td>
<td style="text-align: center;">Porous foam<br>silicone</td>
</tr>
<tr>
<td><strong>Cover</strong><br><strong>included<br></strong></td>
<td style="text-align: center;">No</td>
<td style="text-align: center;">No</td>
<td style="text-align: center;">No</td>
<td style="text-align: center;">No</td>
<td style="text-align: center;">No</td>
<td style="text-align: center;">No</td>
<td style="text-align: center;">No</td>
<td style="text-align: center;">Yes</td>
<td style="text-align: center;">Yes</td>
<td style="text-align: center;">Yes</td>
<td style="text-align: center;">No</td>
<td style="text-align: center;">No</td>
<td style="text-align: center;">No</td>
</tr>
<tr>
<td><strong>Pad<br>thickness (mm)</strong></td>
<td style="text-align: center;"><span class="azul-negrita">8</span></td>
<td style="text-align: center;"><span class="azul-negrita">8</span></td>
<td style="text-align: center;"><span class="azul-negrita">8</span></td>
<td style="text-align: center;"><span class="azul-negrita">8</span></td>
<td style="text-align: center;"><span class="azul-negrita">8</span></td>
<td style="text-align: center;"><span class="azul-negrita">8</span></td>
<td style="text-align: center;"><span class="azul-negrita">8</span></td>
<td style="text-align: center;"><span class="azul-negrita">8</span></td>
<td style="text-align: center;"><span class="azul-negrita"> 8</span></td>
<td style="text-align: center;"><span class="azul-negrita">8 <br></span></td>
<td style="text-align: center;"><span class="azul-negrita">8</span></td>
<td style="text-align: center;"><span class="azul-negrita">-</span></td>
<td style="text-align: center;"><span class="azul-negrita">12<br></span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas10"></a> </p>
<p><strong>TECHNICAL DATA<br></strong></p>
<table>
<tbody>
<tr>
<td><strong>Press model</strong></td>
<td>Brildor XH-B2N <span class="azul-negrita">40x50cm</span></td>
</tr>
<tr>
<td><strong>Press type</strong></td>
<td>Automatic/Swing-away</td>
</tr>
<tr>
<td><strong>Base platen type<br></strong></td>
<td>Pull-out</td>
</tr>
<tr>
<td><strong>Actuation</strong></td>
<td>Electric motor</td>
</tr>
<tr>
<td><strong>Controller<br></strong></td>
<td>LCD digital display</td>
</tr>
<tr>
<td><strong>Base platen measurements (cm)<br></strong></td>
<td class="azul-negrita">40 x 50</td>
</tr>
<tr>
<td><strong>Maximum thickness for pressing (cm)<br></strong></td>
<td class="azul-negrita">5</td>
</tr>
<tr>
<td><strong>Pad thickness (cm)<br></strong></td>
<td class="azul-negrita">1</td>
</tr>
<tr>
<td><strong>Side opening angle (°)<br></strong></td>
<td class="azul-negrita">145</td>
</tr>
<tr>
<td><strong>Maximum pressure (kg | bar)<br></strong></td>
<td class="azul-negrita">360 | 5</td>
</tr>
<tr>
<td><strong>Voltage (V)<br></strong></td>
<td class="azul-negrita">220 - 240</td>
</tr>
<tr>
<td><strong>Power (W)<br></strong></td>
<td class="azul-negrita">2000</td>
</tr>
<tr>
<td><strong>Timer (Sec)<br></strong></td>
<td class="azul-negrita">0-999</td>
</tr>
<tr>
<td><strong>Temperature range (°C | °F)<br></strong></td>
<td class="azul-negrita">232 | 450</td>
</tr>
<tr>
<td><strong>Temperature accuracy (°C)<br></strong></td>
<td class="azul-negrita">±2</td>
</tr>
<tr>
<td><strong>Maximum time for sleep mode activation (min)<br></strong></td>
<td><span class="azul-negrita">120<br></span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>PRECAUTIONS</strong></p>
<ul>
<li>Check the voltage before turning on the press</li>
<li>For your safety, make sure the plug is earthed</li>
<li>Turn off the machine when not in use and unplug it from the power socket</li>
<li>Keep children away from the machine</li>
<li>Protect your hands with gloves during work operations</li>
<li>Do not attempt to press objects that could melt or burn</li>
<li>If the control panel shows "000", contact technical service: thermal sensor error</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas11"></a> </p>
<p><strong>HOW TO ADJUST THE PRESSURE ON THIS PRESS?<br></strong></p>
<p>Here is an explanatory video on how to adjust the pressure for pressing or curing with the HB2N press.</p>
<p> </p>
<p><iframe src="https://player.vimeo.com/video/857799053?h=a94ed5091e" width="640" height="564" frameborder="0" allowfullscreen="allowfullscreen"></iframe></p>
<p> </p>
<p class="enlace"><a id="saber-mas9"></a> </p>
<p><strong>WARRANTY<br></strong></p>
<ul>
<li>As stipulated by law in: <a href="https://www.brildor.com/en/general-terms-and-conditions-for-the-sale#warranty" target="_blank" rel="noopener">General Terms and Conditions for the Sale of Goods</a></li>
</ul>https://www.brildor.com/media/catalog/product/p/l/plancha-automatica-giratoria-extraible-brildor-xh-b2n-40x50cm-d20.jpg1295instock01295000https://www.brildor.com/media/catalog/product/p/l/plancha-automatica-giratoria-extraible-brildor-xh-b2n-40x50cm-d20.jpg16491202012295527610488664886750401505105102652185/Heat Presses/Heat Presses/Swing Away Heat Presses/Heat Presses/Automatic Heat Presses/Productos destacados/Productos destacados EN/Productos destacados FR2021-07-24T06:05:51+0000
