We have upgraded our system to a newer version. Please get in touch with us if you're having trouble locating an item.
/ Each Unit Starting at: €2.56

Sublimation Water Bottle with screw cap - Aluminium

Ref.
921056

A travel water bottle with screw cap you can personalise using dye sublimation printing.

  • Made of aluminium, either white or silver, both with gloss finish. Suitable for sublimation.
  • Available in 400 ml and 600 ml capacity.
  • Print area: 19 x 9 cm (400 ml bottles) - 21 x 14 cm (600 ml bottles)

More information

How to sublimate this bottle?

Availability:
Make a selection first
Reward Points
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program. For each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program.
€3.40 VAT not included / Each Unit
Starting at: €2.56

More information about the aluminium water bottle with screw cap for sublimation

  • Of multiple uses: take it on walks, hikes, trips, sport practices, to school...
  • Easy to wash, lightweight and very resistant.
  • Plastic cap free of Bisphenol A (BPA Free), black with screw closure.
  • With a ring and a metal carabiner hook to hang it on the bag or backpack, to carry the keys.
  • Can be personalised on all its outer area. However, to ensure better results, it is recommended to only sublimate the cylindrical body of the bottle, not the neck part.
  • Customisable with a mug heat press or a sublimation oven.
  • In Related Products, you may find wraps to sublimate these bottles. Moulds, silicone sheets and heat shrink bags are also available for its personalisation in a sublimation oven.
  • Comes in an individual cardboard box.

DIMENSIONS (APPROX.)

Reference nº
032569 032570 033314 033315
Colour White Silver White Silver
Volume capacity 14 oz ≈ 400 ml 14 oz ≈ 400 ml 20 oz ≈ 600 ml 20 oz ≈ 600 ml
Dimensions Ø6.5 x 17.5 cm Ø6.5 x 17.5 cm Ø7.3 x 21.5 cm Ø7.3 x 21.5 cm
Print area
19 x 9 cm 19 x 9 cm 21 x 12 cm 21 x 12 cm

Recommended instructions and parameters for sublimation printing

IN A MUG HEAT PRESS

  • Print the design in mirror image.
  • Preheat the press to 200ºC.
  • Remove the cap from the bottle before sublimation.
  • Hold the paper's printed side against the bottle and fix them with heat resistant tape.
  • Put the bottle into the mug press.
  • Close the press at medium-heavy pressure for 120 seconds.
  • Using a protective glove, remove the newly printed bottle.
  • Remove the paper carefully.

IN A SUBLIMATION OVEN

  • Print the design in mirror image.
  • Preheat the sublimation oven to 200ºC.
  • Remove the cap from the bottle before sublimation.
  • Hold the paper's printed side against the bottle and fix them with heat resistant tape.
  • Place a wrap or a silicone sheet around the bottle. You can also introduce the bottle into a mould or a heat shrink bag and create a vacuum with a heat gun.
  • Put the bottle in the oven for 8 minutes.
  • Using a protective glove, remove the bottle.
  • Carefully remove the wrap, the silicone sheet or the bag and then the paper.
More Information
Ref. 921056
Dimensions (mm) Ø65 x 175 (400 ml) - Ø73 x 215 (600 ml)
Print area (mm) 190 x 90 (400 ml) - 210 x 140 (600 ml)
Colour Silver, White
Surface material Aluminium, Plastic
Items Bottles
Accessory details Carabiner, Ring
Marking techniques Dye Sublimation
Post your question