As low as
€6.76
Sublimation Stainless Steel Can Shaped Water Bottle 500ml
Ref.
049890
As low as
€6.76
Sublimation Stainless Steel Can Shaped Water Bottle 500ml
Ref.
049890
Stainless steel thermos flask with white gloss coating you can print using dye sublimation printing. Vacuum insulated to keep drinks hot or cold.
- Printable with a heat press or oven
- Flip straw lid
- Print area: 23 x 17 cm
- Packed in an individual white box
Related Products
More information about the sublimation stainless steel can-shaped water bottle 500ml
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Sturdy straw lid. Flip up by pulling a tab
- Food grade. BPA free
- Plastic and metal lid with leak-proof silicone gasket.
- Can be customised with a heat press using 10-11 oz heating elements. Also, with a sublimation oven using wraps, silicone sheets or heat shrink bags
THINGS TO KEEP IN MIND
- The current version of this thermos flask has a white lacquered base. In the short video we present you the previous version, without any coating on the base
- Although the interior is resistant to oxidation, it is not resistant to corrosion. Avoid keeping acidic, fermented, or carbonated drinks inside for more than 24 hours. It is recommended to wash it after each use
DIMENSIONS
| Capacity (oz ≈ ml) |
17 ≈ 500 |
| Opening (cm) |
Ø6.2 |
| Base (cm) | Ø5.8 |
| Height (cm) | 18.5 |
| Lid (cm) | Ø6.3 x 2.5 |
| Straw (cm) |
1.5 x 20 x 0.6 |
| Print area (cm) |
23 x 17 |
| Packaging (cm) |
7.5 x 20.3 x 7.5 cm |
| Weight (g) |
234 |
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
- Print the design in mirror image
- Preheat the press to 200ºC
- Remove the lid of the bottle
- Hold the paper's printed side against the bottle and fix it with heat-resistant tape. Place it on the heat press
- Press for 35 seconds, medium pressure
- Take out the thermos flask with the help of a protective glove
- Carefully peel off the paper
WITH A SUBLIMATION OVEN
- Print the design in mirror image
- Preheat the press to 200ºC
- Hold the paper's printed side against the bottle and fix it with heat-resistant tape
- Adjust the wrap or place the flask in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet
- Sublimate in the oven for 6-7 minutes
- Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used
- Carefully remove the paper from the bottle
RELATED POSTS
Additional Information
| Ref. | 049890 |
|---|---|
| Net Weight (kg) | 0.232 |
| Gross Weight (kg) | 0.272 |
| Billable Weight (kg) | 0.299000 |
| Dimensions (mm) | Ø70 x 185 |
| Print area (mm) | 230 x 170 |
| Thickness (mm) | 4 |
| Colour | White, Gloss Silver |
| Surface material | Stainless steel |
| Items | Thermos, Glasses |
| Accessory details | Cap |
| Marking techniques | Dye sublimation |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Log in to your profile, share your opinion, and enter the monthly "Rate & Win" prize draw
Sign in to submit your review
Write a review
0
reviews
5
4
3
2
1
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question