Sublimation Mug - Coloured Handle & Inside

More information about the mug for sublimation with coloured handle and inside

• Cylindrical shape and suitable for sublimation on all its outer area.
• It might present some small irregularities on non-printable areas such as handles, bottom or on the inside.
• Customisable with a heat press, a sublimation oven and a 3D Vacuum press.
• In Related Products, you may find some mug wraps and mug heaters to sublimate this type of mugs.
• Inside the sublimation oven, it is also possible to use heat shrink bags or silicone sheets. These options are also available in Related Products.
• Does not include a box. In Related Products, you may find some models that can be purchased separately.

DIMENSIONS (APPROX.)

Recommended instructions and parameters for sublimation printing

WITH A MUG HEAT PRESS

• Print the design in mirror image.
• Preheat the press to 200ºC.
• Hold the paper's printed side against the mug and fix it with heat resistant tape.
• Close the press at medium-heavy pressure for 180 seconds.
• Using a protective glove, remove the newly printed mug.
• Remove the paper carefully.

WITH A SUBLIMATION OVEN

• Print the design in mirror image.
• Preheat the oven to 200ºC.
• Hold the paper's printed side against the mug and fix it with heat resistant tape.
• Place the wrap or the silicone sheet around the mug. You can also introduce the mug into a heat shrink bag and create a vacuum with a heat gun.
• Put the mug in the oven for 15 minutes.
• Using a protective glove, remove the newly printed mug.
• Remove the paper carefully.