The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
Can be personalised with a heat press using 10-11 oz heating elements. Also, with a sublimation oven using clamps, silicone sheets or heat shrink bags
Box not included. You will find some models in Related Products
THINGS TO KEEP IN MIND
Orca certification sticker on the base. Easily removable if desired
DIMENSIONS (APPROX.)
Capacity (oz ≈ ml)
11≈ 325
Inner diameter (cm)
Ø7.7
Outer diameter (cm)
Ø8.2
Height (cm)
9.7
Base (cm)
Ø8.2
Thickness (cm)
0.3
Handle (cm)
1.7 x 8
Mug-to-handle distance (cm)
3.7
Print area (cm)
23.5 x 9.3
Mug weight (g)
357
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters are given as a guide only. They may vary due to many factors such as the paper used, inks or ambient temperature. Therefore, testing is recommended.
WITH A MUG HEAT PRESS
Print the design in mirror image
Preheat the press to 200ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape
Press for 180 seconds, medium-high pressure
Using a protective glove, remove the newly printed mug
Carefully take off the paper
WITH A SUBLIMATION OVEN
Print the design in mirror image
Preheat the oven to 180ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape
Adjust the wrap around it or slide it into a heat shrink bag and heat it with a heat gun. You can also use a silicone sheet
Sublimate in the oven for 13-15 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used