The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
Perfect as a souvenir, for advertising events or as a gift for Valentine's Day, birthdays, anniversaries and other special events.
Cylindrical body, suitable for sublimation on all its outer surface.
Can be personalised with a heat press or sublimation oven using 15 oz mug heaters.
In Related Products you will find the beer stein transport box suitable for this mug (Ref. 039086).
DIMENSIONS (APPROX.)
Capacity
15 oz ≈ 443 ml
Inner diameter
Ø7,8 cm
Base
Ø8,3 cm
Height
11.9 cm
Thickness
3 mm
Handle
1.6 x 9 cm
Mug-to-handle distance
4 cm
Print area
24 x 11.9 cm
Weight
423 g
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
Print the design in mirror image.
Preheat the press to 180ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape.
Press for 200 seconds, medium-heavy pressure.
Remove the newly printed mug using a protective glove.
Carefully peel off the paper.
WITH A SUBLIMATION OVEN
Print the design in mirror image.
Preheat the press to 200ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape.
Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet.
Sublimate inside the oven for 8 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used.