More information about the conical mug for sublimation

• Original design, ideal for promotional events and celebrations such as weddings, baptisms, stag parties and more.
• Perfect as a souvenir to personalise with pictures of tourist destinations.
• Can be personalised with other techniques such as DTF, screen printing, transfer or self-adhesive vinyl.
• It is possible to customise the whole outer surface.
• Suitable for personalisation with a heat press machine using 12 oz and 17 oz mug heaters. Including a sublimation oven using clamps, silicone sheets or heat shrink bags.
• Box not included. In the Related Products you will find some models of boxes that can be purchased separately.

DIMENSIONS (APPROX.)

Recommended instructions and parameters for sublimation printing

WITH A MUG HEAT PRESS

• Print the design in mirror image.
• Preheat the press to 200ºC
• Hold the paper's printed side against the mug and fix it with heat resistant tape.
• Press for 180-200 seconds, medium pressure.
• Using a protective glove, remove the newly printed mug.
• Carefully remove the paper.

WITH A SUBLIMATION OVEN

• Print the design in mirror image.
• Preheat the press to 200ºC
• Hold the paper's printed side against the mug and fix it with heat-resistant tape.
• Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet.
• Sublimate inside the oven for 8 minutes
• Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used.
• Carefully remove the paper from the mug.