The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
More information about the conical sublimation mug with spoon
Ideal as a souvenir, wedding and communion gift and for use in cafés and restaurants.
Ear-shaped handle with 2 holes to insert the ceramic spoon.
Suitable for personalising with a heat press machine using 12 oz mug heaters. Including a sublimation oven using clamps, silicone sheets or heat shrink bags.
Delivered in a white cardboard box.
THINGS TO KEEP IN MIND
Printable all over except for the handle and spoon.
(*) If you want to see the layers of the template, open the PDF file using Photoshop.
DIMENSIONS (APPROX.)
Capacity
12 oz ≈ 350 ml
Inner diameter
Ø8,7 cm
Outer diameter
Ø9,5 cm
Base
Ø6,4 cm
Height
10.5 cm
Thickness
4 mm
Handle
2 x 8 cm
Mug-to-handle distance
6 cm
Spoon
2.4 x 13 x 0.5 cm
Print area
26 x 10.5 cm
Presentation box
13 x 11 x 9.2 cm
Weight
360 g
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
Print the design in mirror image.
Preheat the press to 180ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape.
Press for 200 seconds, medium-heavy pressure.
Remove the newly printed mug using a protective glove.
Carefully peel off the paper.
WITH A SUBLIMATION OVEN
Print the design in mirror image.
Preheat the press to 200ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape.
Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet.
Sublimate inside the oven for 8 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used.