The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
A poncho baby towel you can personalise using dye sublimation printing, embroidery, and screen printing. With a hood made of the same fabric as the towel.
Made of white polyester (50%) and cotton (50%) on the outside, suitable for sublimation.
Inside made of absorbent 100% cotton terry.
Print area: 75.5 x 99 cm (towel) and 26 x 50 cm (hood).
More information about the hooded baby towel for sublimation
Perfect for use as a bath towel for babies and toddlers or as a blanket for extra warmth.
Suitable for sublimation on the outside of the towel.
Made of white polyester (50%) and cotton (50%).
Its inner side, the one in contact with the baby, is made of absorbent 100% cotton terry.
Very soft and pleasant to the touch on the outside.
With a white border, the same colour as the fabric.
The towel's rectangular area can be personalised with full print sublimation.
Due to the shape of the hood, printing it entirely can be challenging. For it to be easier and for optimal results, partial sublimation is recommended.
DIMENSIONS (APPROX.)
Towel
100 x 99 cm
Hood
50 x 23 cm
Thickness
5 mm
Print area
100 x 99 cm
Recommended instructions and parameters for sublimation printing
Print the design in mirror image.
Preheat the press to 190-200ºC.
Insert a piece of paper or cardboard inside the hood. This will prevent ink transfers to the towel.
Position the printed design on the towel's printable area. Secure them with heat-resistant tape so they won't move.
Place the towel on the press’ lower platen.
Press for 40-50 seconds, medium-heavy pressure.
Using a protective glove, remove the newly printed towel.