More information about the Sublimation Conical Mug - Coloured Inner & Handle

INDEX

> Description

> Things to keep in mind

> Template for personalisation

> Dimensions

> Recommended instructions and parameters for sublimation printing

DESCRIPTION

• Suitable for sublimation on all external surfaces
• Customisable with heat press using 12 oz heating elements cones. Also with sublimation oven using mug wraps, silicone sheets o heat shrink bags
• It can also be customised with other techniques such as DTF, screen printing, transfer y self-adhesive vinyl

THINGS TO KEEP IN MIND

• To make it easier for you to personalisation of this mug you can watch the video on the tab where you can see sample how to make a template for latte mugs

TEMPLATE TO PERSONALISE

To see the layers of the template, open the PDF file using Photoshop.

Template mug conical with interior and handle colour (.pdf - 0,20 MB)

DIMENSIONS

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters given as a guideline. They can vary due to many factors such as the paper used, the inks or ambient temperature. For this reason, it is recommended to perform tests.

WITH A CUP IRON

• Print the design in image mirror
• Preheat the press to 200 ºC
• Hold the paper's printed side against the mug and fix it with heat-resistant tape
• Close the press with medium-high pressure for 180 seconds
• With the help of a protective glove remove the freshly sublimed mug freshly sublimated
• Carefully peel off the paper

WITH A SUBLIMATION OVEN

• Print the design in image mirror
• Heat the oven to 180 °C
• Hold the paper's printed side against the mug and fix it with heat-resistant tape
• Adjust the clamp, or insert the mug into a heat shrink bag heat shrink and heat up with the stripping gun. You can also use a heat shrink silicone sheet
• Sublime in the oven for 13-15 minutes
  
• Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used
• Carefully peel off the paper