Sublimable Glossy Aluminium Photopanels

Bestseller
Sublimable Glossy Aluminium Photopanels

Customisable photo panels with rounded corners for sublimation.

  • White aluminium with a glossy finish
  • Can be cut and drilled
  • Thickness: 1.15 mm

More information

Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the Sublimable Glossy Aluminium Photopanels

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

  • High definition of images and photos transferred to its surface
  • Suitable for sublimation only on the white side
  • Grey back side with glossy finish and protective clear lacquer coating
  • Rounded corners with a radius of 1.5 mm
  • Can be customised in both vertical and horizontal orientation
  • Recommended for indoor spaces. Over time, environmental factors could damage the panel and the sublimated image

THINGS TO KEEP IN MIND

  • The customisable side is covered with protective plastic that must be removed before sublimation
  • Do not include mounts or frames. See some options in Related Products
  • The moisture in the sublimation paper and ink can cause "bleeding" during printing, spreading from the centre to the edges of the panel. To avoid ink contamination for this reason, we recommend using endura fabric for pressing panels of 30 x 40 cm or larger
  • The panels with Ref. 038103 are delivered palletised due to their size. The minimum purchase is 4 units

MEASUREMENTS

Ref. 055229 055283 038100 055230 055242 038098 055231 055233 055284 038099 055234 055237 038101 038102 038103
Measurements (cm) 10 x 10 15 x 15 30 x 30 10 x 15 12 x 16 13 x 18 15 x 20 18 x 24 20 x 25 20 x 30 18 x 32 24 x 32 30 x 40 40 x 60 60 x 80
Digital
Format
1:1 1:1 1:1 2:3 3:4 - 3:4 3:4 4:5 3:2 - 3:4 4:3 3:2 4:3
Thickness (mm) 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated are for guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

Note: The indicated pressing time range is for guidance. A minimum of 90 seconds is suggested for smaller panels, with progressively increasing time for larger panels.

  • Print the design in mirror mode
  • Heat the press to 200 ºC
  • Remove the polyethylene film protecting the white side of the panel
  • Place the panel on the base of the press
  • Position the pre-printed design over the panel
  • Close the press at medium pressure for 90-120 seconds
  • Using a protective glove, remove the freshly sublimated panel
  • Carefully remove the paper
Additional Information
Ref. 925972
Thickness (mm) 1,15
Colour White
Surface material Aluminium
Items Panels
Marking techniques Dye sublimation

Reviews

Share your opinion

It will only take a minute, and your opinion can help other customers.

Log in to your profile, share your opinion, and enter the monthly "Rate & Win" prize draw
0 reviews
5
0
4
0
3
0
2
0
1
0

Questions

No questions found for this product.

Be the first to ask a question!