Endura Fabric - 1m x 150cm
Endura Fabric - 1m x 150cm
The Endura fabric is a material we recommend using during the heat press sublimation of Chromaluxe panels.
It ensures uniform heat distribution, enhances the graphic quality of transferred designs, and eliminates moisture that might be accumulated in the sublimatable item.
- Weight: 75 g/m2
- Sales unit: by metres with a width of 150 cm
More information
-
2 for
€15.15
each
-
5 for
€14.36
each
-
10 for
€13.56
each
-
2 for
€15.15
each
-
5 for
€14.36
each
-
10 for
€13.56
each
More information about Endura Fabric
INDEX
> How to use Endura fabric
> Instructions for achieving optimal results on Chromaluxe panels
HOW TO USE ENDURA FABRIC
- Remove the Teflon sheet from your heat press, if it has one incorporated
- Place the Chromaluxe panel on the heat press with the sublimatable side facing up, and the printed paper in contact with the sublimatable side
- Place the Endura fabric on top of the panel and printed paper, or alternatively, you can cover the upper plate of the heat press with Endura fabric
- *Press at 200 ºC:
- 75 seconds for panels of 279 x 356 mm
- 90 seconds for panels of 400 x 500 mm
*These values will vary depending on the heat press and the dimensions of the panel. You may need to conduct some tests to achieve the optimal setting.
INSTRUCTIONS FOR ACHIEVING OPTIMAL RESULTS ON CHROMALUXE PANELS
- To remove the protective film covering the sublimatable side of the panel easily and without damaging the edges, we recommend wrapping a piece of adhesive tape around your finger and using this finger to separate the film without scratching the panel
- Do not bend the panel after removing it from the heat press and do not rub the edges of the panel. You should wait until it has cooled down before handling it
Additional Information
| Ref. |
034081 |
| Gross Weight (kg) |
0.136 |
| Billable Weight (kg) |
0.150000 |
Questions
No questions found for this product.
Be the first to ask a question!
https://www.brildor.com/en/endura-fabric-1m-x-150cm
21855
Endura Fabric - 1m x 150cm
<p><a name="know-more"></a></p>
<h2>More information about Endura Fabric</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">How to use Endura fabric</a></p>
<p>> <a href="#know-more2">Instructions for achieving optimal results on Chromaluxe panels</a></p>
<p> </p>
<p><a name="know-more1"></a></p>
<p><strong>HOW TO USE ENDURA FABRIC</strong></p>
<ul>
<li>Remove the Teflon sheet from your heat press, if it has one incorporated</li>
<li>Place the Chromaluxe panel on the heat press with the sublimatable side facing up, and the printed paper in contact with the sublimatable side</li>
<li>Place the Endura fabric on top of the panel and printed paper, or alternatively, you can cover the upper plate of the heat press with Endura fabric</li>
<li><span class="naranja-negrita">*</span>Press at <span class="azul-negrita">200 ºC</span>:
<ul>
<li><span class="azul-negrita">75 seconds</span> for panels of <span class="azul-negrita">279 x 356 mm</span></li>
<li><span class="azul-negrita">90 seconds</span> for panels of <span class="azul-negrita">400 x 500 mm</span></li>
</ul>
</li>
</ul>
<p><span class="naranja-negrita">*</span>These values will vary depending on the heat press and the dimensions of the panel. You may need to conduct some tests to achieve the optimal setting.</p>
<p> </p>
<p><a name="know-more2"></a></p>
<p><strong>INSTRUCTIONS FOR ACHIEVING OPTIMAL RESULTS ON CHROMALUXE PANELS</strong></p>
<ul>
<li>To remove the protective film covering the sublimatable side of the panel easily and without damaging the edges, we recommend wrapping a piece of adhesive tape around your finger and using this finger to separate the film without scratching the panel</li>
<li>Do not bend the panel after removing it from the heat press and do not rub the edges of the panel. You should wait until it has cooled down before handling it</li>
</ul>
https://www.brildor.com/media/catalog/product/t/e/tejido-endura-1-m-x-150-cm_1.jpg
15.95
instock
15.95
15.95
0
0
0
0
0
https://www.brildor.com/media/catalog/product/t/e/tejido-endura-1-m-x-150-cm_1.jpg
/Heat Presses
/Heat Presses/Pads & Protectors
2021-07-24T05:40:12+0000
