Sublimable Wide-mouth Thermos with Strainer
Stainless steel thermos bottles with Orca coating, customisable by sublimation.
Wide mouth for adding fruit, ice, tea bags... and a strainer to retain solids while drinking.
- Double wall: to keep the liquid cold or hot
- Cap with handle and leak-proof closure
- Print area: 21.5 x 26.5 cm
Related Products
More information about the Sublimable Wide-mouth Thermos with Strainer
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Suitable for food consumption. Does not transfer taste to the beverage
- Double wall: interior made of 304 stainless steel and exterior of 201 stainless steel
- Screwable plastic strainer ideal for iced drinks or infusions. Includes its own anti-leak silicone seal
- Plastic cap with handle for easy transport
- Large mouth for easy refilling and cleaning of the bottles
- Can also be customised using other techniques such as screen printing, adhesive vinyl, UV DTF...
- Presented in a white cardboard box
THINGS TO KEEP IN MIND
- The screw strainer is necessary to seal the bottle. The cap does not screw directly onto the body
- Although the interior is resistant to oxidation, it is not resistant to corrosion. Avoid keeping acidic, fermented, or carbonated drinks inside for more than 24 hours. It is recommended to wash it after each use
MEASUREMENTS
| Thermos (cm) | Ø8.2 x 29 |
| Capacity (ml ≈ oz) |
1000 ≈ 34 |
| Printing area (cm) | 21.5 x 26.5 |
| Body (cm) | Ø8.2 x 26 |
| Mouth (cm) | Ø5.7 x 2.5 |
| Cap (cm) | Ø6.5 x 5.7 |
| Strainer (cm) | Ø5.7 x 4 |
| Presentation box (cm) | 9 x 30.5 x 9 |
| Weight (g) |
494 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters indicated are for guidance. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.
MUG PRESS
- Print the design in mirror mode
- Heat the press to 200 °C
- Remove the thermos cap
- Place the printed side of the paper around the thermos and secure it with thermal adhesive tape
- Place the thermos in the mug press and close it with medium pressure for 60 - 80 seconds
- With the help of a protective glove, remove the newly sublimated thermos
- Carefully remove the paper
SUBLIMATION OVEN
- Print the design in mirror mode
- Heat the oven to 180-200 °C
- Remove the thermos cap
- Place the printed side of the paper around the thermos and secure it with thermal adhesive tape
- Place the thermos inside a shrink bag and use a heat gun to adhere the bag to the printed paper on the thermos
- Insert the thermos in the oven for 6-7 minutes
- With the help of a protective glove, remove the bag
- Carefully remove the bag and paper from the thermos
| Ref. | 954117 |
|---|
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question