More information about the Sublimable Felt Christmas Hanging Ornaments

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended sublimation instructions and parameters

> Related posts

DESCRIPTION

• Sublimatable white matt finish side
• White-coloured edges
• Hole for inserting and hanging the ornaments
• Can also be customised with other techniques such as laser engraving, DTF, screen printing, textile vinyl, and embroidery

THINGS TO KEEP IN MIND

• During sublimation, the thickness and size of the felt piece may slightly reduce due to the pressure and heat applied (approx. 1 mm). We recommend conducting preliminary tests before starting production
• Does not include hanging ribbon. You can purchase it separately in Related Products

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated are for guidance. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 180 ºC
• Place the ornament on the press plate with the printed side of the paper on the ornament
• Close the press with medium-high pressure for 60-80 seconds
• Using a protective glove, remove the freshly printed ornament
• Carefully remove the paper
• Repeat the entire process on the other side if desired

RELATED POSTS

7 ideas for personalising Christmas ornaments and baubles

The trendy products for personalising ornaments and gifts this Christmas