More information about the Sublimable Acrylic Christmas Hanging Ornaments

INDEX

> Description

> Things to keep in mind

> Dimensions

> Recommended sublimation instructions and parameters

> Related posts

DESCRIPTION

• Made with methacrylate coated on the back with sublimable polyester
• The sublimated design will be visible from the front side with a certain volume effect
  
• Glossy finish surface
• Slot for inserting the ribbon to hang the ornament

THINGS TO KEEP IN MIND

• Both sides of the ornament have a transparent plastic protective film that must be removed before sublimation. It can be easily removed
• Does not include hanging ribbon. You can purchase it separately in Related Products

DIMENSIONS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in direct mode
• Heat the press to 180 °C
• Remove the transparent plastic films covering both sides of the ornament before sublimating
• Place the ornament in the press with the printed side of the paper on the white side of the ornament. Secure them with heat-resistant tape
• Close the press with a medium-low pressure for 80-100 seconds
• Using a protective glove, remove the freshly sublimated ornament
• Carefully remove the paper

RELATED POSTS

7 ideas to personalise Christmas ornaments and baubles

Trendy products to personalise ornaments and gifts this Christmas