
Sublimable Fabric Tobacco Pouches
Customisable fabric cigarette cases by sublimation.
Inner pockets to store rolling tobacco, papers, filters, lighter...
Available models:
- Canvas polyester fabric (100%) with denim or jean interior
- Linen blend fabric of polyester (95%) and cotton (5%)
- Elastic band closure
- Print area: 16 x 18.5 cm

Related Products
More information about the Sublimable Fabric Tobacco Pouches
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Sublimable linen-like tobacco pouch on both sides
- Black elastic band to close the pouch and secure its contents
- Large pocket suitable for inserting the entire rolling tobacco pack. Zipper closure
- 2 smaller compartments for storing filters, lighters, paper, etc.
- Can also be customised with other techniques such as screen printing, rhinestones, textile vinyl, DTF, transfer, and embroidery
THINGS TO KEEP IN MIND
- Keep the elastic band out of the press or cover it with protective paper and heat-resistant tape to prevent damage from heat
- Place a silicone pad or cardboard inside the zippered pocket to provide more rigidity and prevent sublimation errors
- You can use a Nomex protective pad on the press plate to avoid scratching with the zipper. Available in Related Products
- The denim interior of the tobacco pouch is not sublimable
- Before sublimating, it is recommended to clean the surface with a lint roller to remove impurities from the fabric
- Both pouches are the same size. The closure elastic of the linen pouch is 1 cm longer than the denim interior one
MEASUREMENTS
Ref. | 051451 | 056420 |
Fabric |
Denim | Linen |
Weight (g/m2) | - | 400 |
Print area (cm) | 16 x 18.5 | 16 x 18.5 |
Open (cm) | 16 x 27.5 | 16 x 37.5 |
Closed (cm) | 16 x 9 | 16 x 9 |
Zipper pocket (cm) | 15 x 18.5 | 15 x 18.5 |
7 x 9 | 7 x 9 | |
Small pocket (cm) | 11 x 5 | 11 x 5 |
Elastic (cm) | 1 x 9.5 | 1 x 10.5 |
Weight (g) |
37 | 40 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.
- Print the design on paper in mirror mode
- Heat the press to 200 ºC
- Keep the elastic band out of the press or cover it with protective paper and heat-resistant tape
- Before pressing the tobacco pouch, it is recommended to clean the printable surface with a lint roller to remove fabric impurities that could be transferred onto the print
- Place the tobacco pouch on the lower plate of the press and the printed side of the paper on the pouch. Secure them with heat-resistant tape to prevent movement
- Close the press with medium-high pressure for 40-50 seconds
- Using a protective glove, remove the freshly sublimated tobacco pouch
- Carefully remove the paper
Ref. | 952976 |
---|---|
Print area (mm) | 160x185 |
Colour | White, White/Blue |
Surface material | Tissue |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!