
Sublimable Lighters Zippo Type
Silver lighters with 2 aluminium plates customisable by sublimation.
- Metal with zinc alloy
- Refillable with lighter fluid (not included)
- Printing area: 3 x 1.5 cm and 3 x 3 cm
- You can purchase additional plates separately (the top and bottom plates are sold together)

Related Products
More information about the Sublimable Zippo-Type Lighters
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Ideal as souvenirs and gifts for events and celebrations such as weddings, stag parties, birthdays...
- Plates with a white sublimable glossy finish. Non-sublimable silver reverse
- Includes 2 sublimable aluminium plates (top and bottom)
- Locking tab prevents the lighter from closing when in use
- Supplied in a metal case with a cardboard sleeve
- The reverse side of the lighters can also be personalised by laser engraving
THINGS TO KEEP IN MIND
- The customisable side of the plate has a clear protective plastic film that must be removed before sublimation
- The customisable area contains adhesive to attach the plate once sublimated
- It is recommended to carefully fix the plate to the base. Once adhered, it may break if you try to remove it
- Check the position of the plates on the lighter, they only fit in a specific position. The bottom plate is not completely square and must be adjusted according to its shape, and the top plate should be placed with the curve facing upwards
MEASUREMENTS
Lighter (cm) | 3.9 x 5.6 x 1.5 |
Printing area (cm) | 3 x 1.5 (top plate) |
2.9 x 2.9 (bottom plate) | |
Case (cm) | 6 x 8 x 2 |
Lighter weight (g) | 59 |
Lighter + case weight (g) |
89 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters indicated are for guidance purposes. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.
- Check the position of the plates as indicated. See note
- Print the design in mirror mode
- Heat the press to 200 ºC
- Remove the protective film from the sublimable side of the plate
- Place the printed side of the paper on the plate. Secure them with heat-resistant tape to prevent movement
- Place the plate on the lower platen of the press
- Close the press with medium pressure for 40 seconds
- With the help of a protective glove, remove the plate
- Carefully remove the paper
- Remove the paper covering the adhesive on the lighter lid and place the sublimated plate
- Press the plate firmly onto the lid
Ref. | 954137 |
---|---|
Print area (mm) | 30x10 | 30x30 |
Colour | Silver |
Surface material | Zinc alloy |
Items | Lighters |
Marking techniques | Dye sublimation, Laser engraving |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!