Sublimable Ceramic Planters with Bamboo Base
Sublimable Ceramic Planters with Bamboo Base
11 oz customisable planters by sublimation, with bamboo base.
- White ceramic with glossy finish
- Hole at the bottom to allow water to drain
- Print area: 26.2 x 9 cm
Related Products
More information about the Sublimable Ceramic Planters with Bamboo Base
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Customisable vases for small plants such as succulents, cacti, pileas, fittonias, aromatic herbs... Also useful as toothbrush holders, vases, etc.
- Cylindrical body made of white ceramic, sublimable on the entire outer surface
- Bamboo base prevents direct contact between the planter and any other surface. Can be personalised with laser engraving
- Drainage hole at the bottom. Prevents water from accumulating at the bottom of the planter and damaging the roots
- Suitable for sublimation with a transfer press using 11 oz elements. Also with a sublimation oven using clamps, silicone sheets or shrink bags
- Can also be personalised using other techniques such as screen printing, adhesive vinyl or direct printing
- Supplied in individual box
THINGS TO KEEP IN MIND
- The bamboo base is not suitable for sublimation
MEASUREMENTS
| Capacity (ml ≈ oz) | 325 ≈ 11 |
| Print area (cm) | 26.2 x 9 |
| External diameter (cm) | Ø8.2 |
| Internal diameter (cm) | Ø7.5 |
| Height (without cork base) (cm) | 9.7 |
| Base (cm) | Ø8.2 |
| Hole (cm) | Ø1.1 |
| Thickness (mm) | 3 |
| Bamboo base (cm) | Ø9.2 x 1 |
| Presentation box (cm) | 10.5 x 11 x 9.8 |
| Net weight (g) | 378 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters provided for guidance purposes. It is recommended to carry out preliminary tests to make the necessary adjustments before starting production.
WITH MUG PRESS
- Print the design in mirror mode
- Heat the press to 200 ºC
- Place the paper with the printed side around the planter and secure it with heat-resistant tape
- Close the press at medium-high pressure for 180 seconds
- With the help of a protective glove, remove the freshly sublimated planter
- Carefully remove the paper
WITH SUBLIMATION OVEN
- Print the design in mirror mode
- Heat the oven to 180 ºC
- Place the printed paper around the planter and secure it with heat-resistant tape
- Adjust the clamp or place the planter in a shrink bag and heat with a heat gun. You can also use a silicone sheet
- Sublimate in the oven for 13-15 minutes
- With the help of a protective glove, remove the clamp, silicone sheet or bag, as appropriate
- Carefully remove the paper from the planter
RELATED POSTS
| Ref. | 955711 |
|---|---|
| Surface material | Ceramic |
| Marking techniques | Dye sublimation, Transfer, Screen printing, Self-adhesive vinyl, UV printing |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question