Stackable Sublimation Mugs - Coloured Inside
Stackable Sublimation Mugs - Coloured Inside
Stackable white mugs of 12 oz, customisable by sublimation.
- Gloss finish ceramic with coloured interior
- Top and bottom can be sublimated separately
- Print areas: 23.5 x 6 cm (top) and 22.5 x 4 cm (bottom)
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program
Related Products
More information about the Stackable Sublimation Mugs - Coloured Inside
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Perfect as a gift for celebrations and special occasions such as Christmas, birthdays, etc.
- The mugs can be safely stacked one inside another
- Smaller diameter at the base to fit into other mugs of the same type
- Microwave and dishwasher safe
- Can also be personalised using other techniques such as DTF, screen printing, transfer and adhesive vinyl
- Find suitable boxes for these mugs sold separately
THINGS TO KEEP IN MIND
- It is recommended to sublimate the bottom part using shrink bags, a heat gun and a sublimation oven. The top part can be sublimated with a mug press, as well as with a sublimation oven
TIPS AND ADVICE
- Create coordinated sets by sublimating several mugs with matching designs so that, when stacked, they form a continuous and original composition
MEASUREMENTS
| Capacity (oz ≈ ml) | 12 ≈ 360 |
| Top print area (cm) | 23.5 x 6 |
| Bottom print area (cm) | 22.5 x 4 |
| Inner diameter (cm) | Ø7.5 |
| Outer diameter (cm) | Ø8.3 |
| Base (cm) | Ø6.6 |
| Height (cm) | 11 |
| Thickness (mm) | 3 |
| Distance mug-handle (cm) | 3 |
| Weight (g) | 150 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters provided are for guidance only. It is recommended to carry out preliminary tests to make any necessary adjustments before starting production.
WITH MUG PRESS
- Print the design in mirror mode
- Heat the press to 200 ºC
- Place the printed paper around the mug and secure it with heat-resistant tape
- Close the press at medium pressure for 180-200 seconds
- With the help of a protective glove, remove the freshly printed mug
- Carefully remove the paper
WITH SUBLIMATION OVEN
- Print the design in mirror mode
- Heat the oven to 180 ºC
- Place the mirrored design around the mug and secure it using heat-resistant tape
- Adjust the clamp, or place the mug inside a shrink bag and heat with the heat gun, avoiding the formation of wrinkles. You can also use a silicone sheet
- Sublimate in the oven for 13-15 minutes
- With the help of a protective glove, remove the clamp, silicone sheet or shrink bag, as appropriate
- Carefully remove the paper from the mug
Additional Information
| Ref. | 925955 |
|---|---|
| Print area (mm) | 235 x 60 (superior) y 225 x 40 (inferior) |
| Thickness (mm) | 3 |
| Colour | Fluorescent Yellow, White/Yellow, White/Blue, White/Orange, White/Green |
| Surface material | Ceramic |
| Items | Mugs |
| Accessory details | Handles |
| Marking techniques | Dye sublimation |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Log in to your profile, share your opinion, and enter the monthly "Rate & Win" prize draw
0
reviews
5
4
3
2
1
Questions
No questions found for this product.
Be the first to ask a question!