More information about the Silicone for Making Moulds

INDEX

> Description

> Things to keep in mind

> Storage recommendations

> Precautions before opening

> Instructions for use

> Tips and tricks

> Dimensions

DESCRIPTION

• Ideal for making your own moulds for handicrafts
• Strong, odourless, flexible and smooth finish
• Low viscosity for precise filling of moulds, even the smallest details. No air bubbles
• Easy to mix and pour
• Fast curing

THINGS TO KEEP IN MIND

• Once you have mixed the resin and hardener in the right proportion, you will get a ready-to-use mixture of 1 litre of silicone
• Add only the recommended quantities of silicone (A) and hardener (B)
• This formula is not suitable for making food moulds
• Use gloves to avoid skin irritation in case of direct contact

STORAGE RECOMMENDATIONS

In order for this product to maintain its chemical properties and not suffer alterations, the storage space should comply with the following conditions:

• Cool place with an average temperature between 15 ºC and 25 ºC
• Dry environment with humidity less than 50%
• Do not expose to UV light

PRECAUTIONS BEFORE OPENING

• Upon receipt of the package from the transport agency, wait 24 hours before opening the jars of this product. During this time, keep them in a cool, dry place, without moving them.

INSTRUCTIONS FOR USE

• Mix parts A and B in a 1:1 ratio
• Stir for 5 minutes. Shake well for best results
• Pour the mixture into moulds on demand
• Leave to stand for at least 12 hours at room temperature
• Unmould and you have your mould ready to use

DIMENSIONS