More information about the Silicone Gun

INDEX

> Description

> How to use the glue gun from silicone?

> Recommendations

> Technical data

DESCRIPTION

• Adhesive suitable for ceramics, plastic, wood, cardboard, fabric, metal...
• Suitable for silicone sticks with a diameter between 10.8 and 11.5 mm
• When using the sublimation technique, it can be used as a substitute for double-sided adhesive tape for sticking key rings, ceramic tiles, aluminium foils, photographic panels...
• CE certification which guarantees that the silicone gun complies with the requirements of the European Union

HOW TO USE THE SILICONE GLUE GUN?

1. Connect the gun to the power supply
2. Insert the glue stick glue into the back of the gun
3. Press the trigger several times until the silicone glue stick is firmly glue is firmly fixed in the inlet tube
4. Preheat the gun for approximately 5 minutes
5. Squeeze the trigger until the gun comes out of the glue out of the spout
6. Clean the surfaces for better bonding
7. It is not necessary to extend the glue
8. Squeeze the two surfaces to be joined for 15 seconds
9. The use of mug wraps or other devices is not necessary
10. Unplug the gun when finished. No cleaning required
11. Leave the excess glue stick inside the gun. Do not remove it

RECOMMENDATIONS

• Do not remove the glue stick from the back of the gun
• Only silicone glue sticks with a compatible diameter (between Ø10.8 and Ø11.5 mm) should be inserted into the gun. Otherwise, the gun may be damaged
• Avoid touching the gun or the adhesive when it is in operation
• Do not leave the gun upside down for more than 15 minutes without using it
• The first use of the gun may cause smoke. With use, it will stop producing smoke
• When unplugging the gun while it is hot, excess silicone deposited on the nozzle may continue to come out
• Keep the workplace ventilated and dry
• Keep the gun out of the reach of children

TECHNICAL DATA