Rip Software CADlink Digital Factory v11 DTF Desktop Edition
Share
Rip Software CADlink Digital Factory v11 DTF Desktop Edition
Rip software CADlink Digital Factory V11, specially developed for DTF printing. Full image control to achieve high-quality printing by optimising the printing process.
Licence dongles for A2 printers (Ref. 040631) and above (Ref. 050407)
Compatible with Windows and design programs such as Photoshop, Illustrator and CorelDRAW
Suitable for DTF printers
A2 licence extensions (Ref. 040631):
For printing on larger formats (Ref. 049247)
For use on 3 devices and manage prints up to 43.2 cm wide (Ref. 049247)
For CadLink software to run properly, the computer must have the following characteristics:
Windows 10/11 operating system. All updates must be installed
CPU: Intel Core i5-i 2.6-3.0 GHz
RAM: 8-12 GB
HARD-DRIVE: 500 GB SSD (recommended) or HDD
Minimum resolution of 1280 x 800 pixels
Recommended requirements: Windows 10 (64-bit) and 1600 x 90 pixels
NOTE: If any problems arise during the installation, we recommend turning off your antivirus protection.
WHAT’S IN THE DONGLE (USB)?
Licence files (xxxxxxHM), where x is the dongle number
Program files (Digital Factory v11)
Quick setup sheet in PDF
Setup wizard link (setup.exe)
To install the software, connect the USB to the computer, run Setup.exe and follow the on-screen instructions.
PRE-PRODUCTION TOOLS
Supports countless vector and pixel file formats such as bmp, gif, jpg, jpeg, png, ping, tif, tiff, psd, svg, ps, tmp, eps, ai and pdf
Image editing through GIMP, a free software similar to Photoshop and optimised to interact comfortably with the RIP without leaving the programme
Create patterns based on images to achieve full-print personalisation
You may arrange your designs manually or automatically on the same page, featuring the ability to copy the same design for a customisation run. It will generate copies of it in matrix mode using rows and columns to fill the film area
Automatic nesting of different layouts on the film Smart distribution of images for space optimisation
Super Size Image: increases the resolution to avoid visible pixels in non-vector images
You can use effects to add frames or vintage finishes
COLOUR AND INK MANAGEMENT TOOLS
Quick adjustments for transparency, contrast, brightness, and saturation
Create patterns to reduce ink consumption
KnockMeBlackOut: for designs to be printed on black garments Eliminates black areas of the design so that the white layer will not be printed followed by a layer of black, which saves ink
KnockMeColorOut: allows you to select and remove up to 4 colours from the design with a single click
White and colour ink flow control to optimise consumption and calculate cost per print
A2 LICENCE EXTENSIONS
Applies to the licence for A2 printers (Ref. 040631).
A2 or higher extension
Allows printing in larger formats using a small device
Extension 3 printers
The CADlink software licence allows you to work with only one printing device. This extension allows you to add 3 printing devices with up to A2 sheets and rolls up to 43.2 cm wide
You can switch from one device to another without losing the configuration of each printer
Before the end of the delivery period, you will receive an email with all the steps for the installation of the extension
https://www.brildor.com/en/rip-software-cadlink-digital-factory-dtf-edition44108Rip Software CADlink Digital Factory v11 DTF Desktop Edition<p class="enlace"><a id="know-more"></a> </p>
<h2>More information about the CADlink Digital Factory v11 DTF Edition rip software</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Trial version</a></p>
<p>> <a href="#know-more3">Supported printers</a></p>
<p>> <a href="#know-more4">Installation requirements</a></p>
<p>> <a href="#know-more5">What’s on the dongle?</a></p>
<p>> <a href="#know-more6">Pre-production tool</a></p>
<p>> <a href="#know-more7">Colour and ink management tool</a></p>
<p>> <a href="#know-more8">A2 licence extensions</a></p>
<p> </p>
<p><a name="know-more1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Ultra-fast RIP processing, even with multiple job queues, which you can configure according to the printer, inks and layouts</li>
<li>Compatible with Epson L1800, L805, L1800 and L805 printers included in our DTF printer bundles (A4, A3 and A3+)</li>
<li>Ability to work with many different formats and substrates</li>
<li>Maximum optimisation of printer and ink efficiency</li>
<li>Very simple, user-friendly interface with quick responsiveness</li>
<li>Includes CMYK + White drivers, specially created for L1800, L1800 and L805 printers</li>
<li>Real-time nozzle check, automatic print head cleaning, and maintenance alert notifications</li>
<li>Several preview modes: white layer (choke), colour layer, colour replacement, final result, print preview</li>
<li>Pre-set print modes with the possibility to manually adjust the parameters by creating a template</li>
</ul>
<p> </p>
<p><a name="know-more2"></a></p>
<p><strong>15-DAY TRIAL VERSION<br></strong></p>
<ul>
<li><a href="https://updater.cadlink.com/OnlineTrialDownloaders/download.php?params=U3VWL1A2M0U2bVVjOE81WjRVajIxZz09" target="_blank" rel="noopener">Download from the following link</a></li>
</ul>
<p> </p>
<p><a name="know-more3"></a></p>
<p><strong>SUPPORTED PRINTERS <br></strong></p>
<ul>
<li><a title="Supported printers for CADlink Digital Factory v10 DTF Edition Rip software" href="https://www.brildor.com/media/upload/downloads/Supported_Printers_software_rip_CADlink_V10_DTF_Edition_2023_EN.pdf" target="_blank" rel="nofollow noopener">Download from the following link: PDF - 60 kB</a></li>
</ul>
<p> </p>
<p><a name="know-more4"></a></p>
<p><strong>INSTALLATION REQUIREMENTS</strong></p>
<p>For CadLink software to run properly, the computer must have the following characteristics:</p>
<ul>
<li>Windows 10/11 operating system. All updates must be installed</li>
<li>CPU: Intel Core i5-i 2.6-3.0 GHz</li>
<li>RAM: 8-12 GB</li>
<li>HARD-DRIVE: 500 GB SSD (recommended) or HDD</li>
<li>Minimum resolution of 1280 x 800 pixels</li>
<li>Recommended requirements: Windows 10 (64-bit) and 1600 x 90 pixels</li>
</ul>
<p><strong>NOTE</strong>: If any problems arise during the installation, we recommend turning off your antivirus protection.</p>
<p> </p>
<p><a name="know-more5"></a></p>
<p><strong>WHAT’S IN THE DONGLE (USB)?</strong></p>
<ul>
<li>Licence files (xxxxxxHM), where x is the dongle number</li>
<li>Program files (Digital Factory v11)</li>
<li>Quick setup sheet in PDF</li>
<li>Setup wizard link (setup.exe)</li>
</ul>
<p>To install the software, connect the USB to the computer, run <strong>Setup.exe</strong> and follow the on-screen instructions.</p>
<p> </p>
<p><a name="know-more6"></a></p>
<p><strong>PRE-PRODUCTION TOOLS</strong></p>
<ul>
<li>Supports countless vector and pixel file formats such as bmp, gif, jpg, jpeg, png, ping, tif, tiff, psd, svg, ps, tmp, eps, ai and pdf</li>
<li>Image editing through GIMP, a free software similar to Photoshop and optimised to interact comfortably with the RIP without leaving the programme</li>
<li>Create patterns based on images to achieve full-print personalisation</li>
<li>You may arrange your designs manually or automatically on the same page, featuring the ability to copy the same design for a customisation run. It will generate copies of it in matrix mode using rows and columns to fill the film area</li>
<li>Automatic nesting of different layouts on the film Smart distribution of images for space optimisation</li>
<li>Super Size Image: increases the resolution to avoid visible pixels in non-vector images</li>
<li>You can use effects to add frames or vintage finishes</li>
</ul>
<p> </p>
<p><a name="know-more7"></a></p>
<p><strong>COLOUR AND INK MANAGEMENT TOOLS</strong></p>
<ul>
<li>Quick adjustments for transparency, contrast, brightness, and saturation</li>
<li>Create patterns to reduce ink consumption</li>
<li>KnockMeBlackOut: for designs to be printed on black garments Eliminates black areas of the design so that the white layer will not be printed followed by a layer of black, which saves ink</li>
<li>KnockMeColorOut: allows you to select and remove up to 4 colours from the design with a single click</li>
<li>White and colour ink flow control to optimise consumption and calculate cost per print</li>
</ul>
<p> </p>
<p><a name="know-more8"></a></p>
<p><strong>A2 LICENCE EXTENSIONS</strong></p>
<p>Applies to the licence for A2 printers (Ref. 040631).</p>
<p><strong>A2 or higher extension</strong></p>
<ul>
<li>Allows printing in larger formats using a small device</li>
</ul>
<p><strong>Extension 3 printers</strong></p>
<ul>
<li>The CADlink software licence allows you to work with only one printing device. This extension allows you to add 3 printing devices with up to A2 sheets and rolls up to <span class="azul-negrita">43.2 cm</span> wide<span class="azul-negrita"><br></span></li>
<li>You can switch from one device to another without losing the configuration of each printer</li>
<li>Before the end of the delivery period, you will receive an email with all the steps for the installation of the extension</li>
</ul>
<p> </p>
<p> </p>https://www.brildor.com/media/catalog/product/s/o/software-rip-cadlink-digital-factory-v10-dtf-d11.jpg175instock0175000https://www.brildor.com/media/catalog/product/s/o/software-rip-cadlink-digital-factory-v10-dtf-d11.jpg2757943201/DTF Printing/DTF Printing/Printing Equipment & Software2022-04-04T13:35:41+0000
