Loading..

Product was successfully added to your shopping cart.
€14.95

Mosquito Repellent TPU Filament for 3D printers - Spool of 250g

Ref. 040090

Mosquito Repellent TPU Filaments for 3D printers - Spool of 250g

  • Mosquito Repellent TPU Filaments for 3D printers - Spool of 250g - Example of use
€14.95

Mosquito Repellent TPU Filament for 3D printers - Spool of 250g

Ref. 040090

Tecnikoa Filafly® high-quality scented filament with mosquito-repellent properties for 3D printing. It contains natural citronella additives that repel flying insects and emanate a pleasant lemony aroma.

  • Made of yellow thermoplastic polyurethane (TPU)
  • Thickness: Ø1.75 mm
  • Hardness: 90A
  • Sale unit: 250 g spools.

More information

+ Read More
- Read Less
Availability:
  • Immediate: 19 units
  • If you want to schedule an order that exceeds our TOTAL availability, please contact customersupport@brildor.com including the reference of the product you are interested in. This does not apply to products in the outlet section.

€14.95
/ Each Unit VAT not included
  • Buy 5 for €13.79 each
For each unit you buy, you will accumulate 0,20€ to redeem on your next order. Discover the Brildor Loyalty Program

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Mosquito Repellent TPU Filament for 3D printers - Spool of 250g Description

More information about the mosquito-repellent TPU filament for 3D printers

  • Ideal for creating all kinds of 3D items that will act as a repellent for flying insects.
  • Perfect for printing bracelets, necklaces, keyrings, watch straps, coasters, hiking accessories, and many more.
  • Gives off an intense citronella scent and will maintain its mosquito-repellent properties for up to 2 years if the item is kept indoors.
  • Its semi-rigid structure makes it easier to extrude and print flexible objects that are pleasant to the touch.
  • Similar to PLA filaments in extrusion temperatures, but with a higher compressive and tensile strength.
  • Suitable for 3D printers with direct or Bowden extrusion systems.
  • 100% recyclable material, non-toxic, with food-grade certification. You may use it to print pet toys or children's toys that may come into contact with the mouth.
  • Delivered in a cardboard box, vacuum packed and wound on clear plastic spools to preserve its fragrance.

DOWNLOAD HERE

TECHNICAL DETAILS(*)

Thickness Ø1.75 mm
Tolerance ±0.03 mm
Print temperature 215 - 235ºC
Print speed 20-70 mm/s
Hot bed temperature 0 - 40ºC
Layer height 0.2 mm
Nozzle diameter 0.4/0.6 mm
Retraction settings Bowden: 3.5 - 6.5 mm
Direct: 0.9 - 1.2 mm

(*) Guide values. We recommend experimenting with your 3D printer to find the most appropriate parameters.

DIMENSIONS (APPROX.)

Spool  Ø14 x 4.2 cm
Filament weight 0.25 kg
Spool + filament weight 0.39 kg
Presentation box 16 x 6 x 16 cm
Box weight 0.45 kg

THINGS TO KEEP IN MIND

  • TPU is a material prone to absorb moisture. When this happens, the filament can make bubbles or creaks when printing. 
  • To remove moisture, you can use any of the following strategies:
    • Leave the filament in a closed room with a dehumidifier for 24 hours.
    • Place the filament in an oven for 2 hours at a temperature of 60°C.

STORAGE & PRESERVATION

  • Filaments tend to absorb moisture from the environment, leading to problems during printing or finishing. For this reason, it is important to keep the relative humidity value between 10-15%.
  • Moisture may cause the filament to degrade, clogging the extruder and varying it’s physical and mechanical properties.
  • To keep the filament in good condition and preserve its aroma for as long as possible, it needs to be stored and dried correctly.
  • The filament must be stored in airtight containers, preferably vacuum packed. You can use zip bags with silica gel beads, vacuum-sealed bags or food containers with a vacuum seal.
  • There are many techniques to remove moisture, including:
    • Conventional methods such as drying the filament in a home oven or a food dehydrator. At low temperatures for long periods of time.
    • Professional ways such as using a filament dryer.
  • The useful life of a filament can vary according to different factors. That is why it is important to follow the manufacturer’s recommendations for drying and storage parameters.
Additional Information
Reference nº 040 090
Gross Weight (kg) 0.45
Billable Weight 0.4950
Post your question

Questions and Answers

There are no entries.

Mosquito Repellent TPU Filament for 3D printers - Spool of 250g Description

More information about the mosquito-repellent TPU filament for 3D printers

  • Ideal for creating all kinds of 3D items that will act as a repellent for flying insects.
  • Perfect for printing bracelets, necklaces, keyrings, watch straps, coasters, hiking accessories, and many more.
  • Gives off an intense citronella scent and will maintain its mosquito-repellent properties for up to 2 years if the item is kept indoors.
  • Its semi-rigid structure makes it easier to extrude and print flexible objects that are pleasant to the touch.
  • Similar to PLA filaments in extrusion temperatures, but with a higher compressive and tensile strength.
  • Suitable for 3D printers with direct or Bowden extrusion systems.
  • 100% recyclable material, non-toxic, with food-grade certification. You may use it to print pet toys or children's toys that may come into contact with the mouth.
  • Delivered in a cardboard box, vacuum packed and wound on clear plastic spools to preserve its fragrance.

DOWNLOAD HERE

TECHNICAL DETAILS(*)

Thickness Ø1.75 mm
Tolerance ±0.03 mm
Print temperature 215 - 235ºC
Print speed 20-70 mm/s
Hot bed temperature 0 - 40ºC
Layer height 0.2 mm
Nozzle diameter 0.4/0.6 mm
Retraction settings Bowden: 3.5 - 6.5 mm
Direct: 0.9 - 1.2 mm

(*) Guide values. We recommend experimenting with your 3D printer to find the most appropriate parameters.

DIMENSIONS (APPROX.)

Spool  Ø14 x 4.2 cm
Filament weight 0.25 kg
Spool + filament weight 0.39 kg
Presentation box 16 x 6 x 16 cm
Box weight 0.45 kg

THINGS TO KEEP IN MIND

  • TPU is a material prone to absorb moisture. When this happens, the filament can make bubbles or creaks when printing. 
  • To remove moisture, you can use any of the following strategies:
    • Leave the filament in a closed room with a dehumidifier for 24 hours.
    • Place the filament in an oven for 2 hours at a temperature of 60°C.

STORAGE & PRESERVATION

  • Filaments tend to absorb moisture from the environment, leading to problems during printing or finishing. For this reason, it is important to keep the relative humidity value between 10-15%.
  • Moisture may cause the filament to degrade, clogging the extruder and varying it’s physical and mechanical properties.
  • To keep the filament in good condition and preserve its aroma for as long as possible, it needs to be stored and dried correctly.
  • The filament must be stored in airtight containers, preferably vacuum packed. You can use zip bags with silica gel beads, vacuum-sealed bags or food containers with a vacuum seal.
  • There are many techniques to remove moisture, including:
    • Conventional methods such as drying the filament in a home oven or a food dehydrator. At low temperatures for long periods of time.
    • Professional ways such as using a filament dryer.
  • The useful life of a filament can vary according to different factors. That is why it is important to follow the manufacturer’s recommendations for drying and storage parameters.

Additional Information

Reference nº 040 090
Gross Weight (kg) 0.45
Billable Weight 0.4950
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.