HTV Transfer Tape - Siser EasySubli TTD - A3 Sheet

More information about the Siser EasySubli TTD transfer tape for heat transfer vinyl.

• Adhesive film especially useful for transferring designs with letters, logos, printed motifs or designs onto fabrics. Allows each element to be positioned in the same ways as it is printed.
• Silicone sheet, with better properties than the usual polyester transfer tapes. Silicone, unlike polyester, prevents part of the ink from passing through to the transfer tape during sublimation.
• Grid texture so that it can stick to the ink while it’s wet.
• Easy to stick. It allows you to transfer Siser EasySubli HTV with ease, quickly and efficiently.
• Transparent. Perfect to see and place the adhesive correctly on the target surface.

THINGS TO KEEP IN MIND

• We recommend letting the film dry before removing the transfer tape.

TECHNICAL DETAILS

INSTRUCTIONS FOR USE

• Unfold the transfer tape over the already pre-cut and weeded vinyl.
• Stick the transfer tape to the vinyl.
• Press with a squeegee to remove any bubbles left on the surface. Repeat this process on both sides.
• Separate the vinyl from its liner.
• Place it on the previously pressed fabric.
• Press following the sublimation parameters of the Siser EasySubli HTV (Ref. 927223).
• Open the press and let the ink dry before removing the transfer tape.
• Remove the tape from the bottom up.