Loading..

Product was successfully added to your shopping cart.

Heat Press Machine & mug accessory - Brildor Hobby 2 - Manual

Heat Press Machine & mug accessory - Brildor Hobby 2 - Manual

  • Heat Press Machine & accessory - Brildor Hobby 2 - Manual - Press
  • Heat Press Machine & accessory - Brildor Hobby 2 - Manual - Mug accessory
  • Heat Press Machine & accessory - Brildor Hobby 2 - Manual - Display "ON"
  • Heat Press Machine & accessory - Brildor Hobby 2 - Manual - Control panel details
  • Heat Press Machine & accessory - Brildor Hobby 2 - Manual - Use
  • Heat Press Machine & accessory - Brildor Hobby 2 - Manual - Base
  • Heat Press Machine & accessory - Brildor Hobby 2 - Manual - Heating plate
  • Heat Press Machine & accessory - Brildor Hobby 2 - Manual - Mug accessory connector details
  • Heat Press Machine & accessory - Brildor Hobby 2 - Manual - Teflon sheet and silicone pad

Heat Press Machine & mug accessory - Brildor Hobby 2 - Manual

A Brildor Hobby 2 manual heat press perfect for personalisation through sublimation printing and textile vinyl. Particularly useful for heat transfers on irregular shaped or large objects such as canopies and chairs. It is also appropriate to personalise t-shirts and mugs as a hobby with professional quality.

  • Compact, lightweight and portable.
  • Heating plate with an integrated handle that allows the press to be placed directly against the item.
  • Mug accessory is optional.
  • Heating plate dimensions: 23.5 x 23.5 cm

More information about this press and its mug accessory.

User instructions.

+ Read More
- Read Less
Availability: Indicated in each product

Product Name Price Availability Qty
Manual Heat Press - Brildor Hobby 2
Manual Heat Press - Brildor Hobby 2
Ref. 038096
€149.00
  • Immediate: 0 units
  • Expected entry the 16/10/2020: 50 units
Mug Accessory for Brildor Hobby 2 manual heat press
Mug Accessory for Brildor Hobby 2 manual heat press
Ref. 038097
€59.00
  • Immediate: 34 units
VAT not included
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Heat Press Machine & mug accessory - Brildor Hobby 2 - Manual Description

More information about the Brildor Hobby 2 manual heat press and its mug accessory

  • Large and ergonomic easy-grip handle.
  • Insulating safety base that keeps it protected when not in use.
  • Precise temperature control.
  • Ceramic-coated heating plate. Evenly heats from edge to edge, achieving optimal and long-lasting transfers.
  • Obtains pressing results in less than 60 seconds.
  • Protection against power surges.
  • The casing of the press is made of white, grey and red non-flammable plastic.
  • Insulating inner material.
  • Digital temperature and time control panel.
  • Also available a mug heater that must be purchased separately. Suitable for mugs up to 11oz.

    TECHNICAL DETAILS

    Press type
    Manual
    Heating plate
    23.5 x 23.5 cm
    Temperature range
    0 - 200ºC
    Temperature accuracy ±5ºC
    Time range 0-300 s
    Heating speed
    5 minutes of preheating to reach maximum temperature
    Power 850W
    Voltage 110V/220V

      IN THE BOX

      Brildor Hobby 2 Manual Press 1
      Safety base 1
      Silicone pad 1
      Teflon sheet 1
      User Guide (English) 1

        DIMENSIONS (APPROX.)

        Brildor Hobby 2 manual press
        Press 24 x 24 x 10 cm
        Heating plate 23.5 cm x 23.5 cm x 3 mm
        Safety base 28.6 x 28.6 x 4.5 cm
        Pad 29 cm x 29.2 cm x 7 mm
        Teflon sheet 30 x 30 cm
        Power cable 1.20 m
        Packaging 39.5 x 34.5 x 22 cm
        Net weight 3.55 kg
        Mug accessory
        Height 12.8 cm
        Thickness 3 cm
        Outer diameter 11.1 cm
        Inner diameter 8.2 cm
        Press connection cable 47 cm
        Packaging 19 x 26.5 x 19.5 cm
        Net weight 1.34 kg

          User instructions for the Brildor Hobby 2 manual heat press and its mug accessory

          AS A FLAT HEAT PRESS

          CONTROL PANEL

          • POWER. Press to turn the press on or off. For security reasons, the press has an automatic shut down system. After 10 minutes of inactivity, it will emit a sound and shut down. Press any button to cancel the shutdown sequence.
          • "TEMP". Easy temperature set up. Press and hold the button to change from Fahrenheit to Celsius.
          • "TIMER". Press it to adjust the time. It can be set up from 0 to 300 seconds.
          • "INCREASE" or "DECREASE". Press to increase or decrease by a digit. Press and hold to do it faster.
          • "TIMING". Press this button to start pressing, and time will start counting down. When finished, you will hear a sound. Press the button again to stop it.
          • "MODE". Hold this button to change between the flat press mode (blue light) and the mug press one (orange light).

          HOW TO USE IT?

          1. Press the POWER button to start the press.
          2. Press the "TEMP" button and temperature will start blinking. Adjust it with "INCREASE" or "DECREASE" until the desired temperature has been reached.
          3. Repeat the process, and select the time needed for your transfer by pressing on the "TIMER" button.
          4. Use the included silicone pad as pressing support. Preheat the garment for 3-5 seconds to remove wrinkles and moisture.
          5. Place the design where you want it on the fabric. You can use heat-resistant tape to hold the paper and prevent it from moving.
          6. Cover with the Teflon sheet.
          7. When the temperature reaches the desired value, apply pressure holding the press by its handle until you notice some depth on the pad. You can apply gentle or heavy pressure, depending on the garment you want to print.
          8. Press on the TIMING button to start the countdown.
          9. You will hear a sound when the timer reaches zero. Press the clock button to stop it. Lift the press.
          10. Turn the garment and apply heat for about 10-15 seconds.
          11. If the paper or vinyl cannot be removed easily, re-apply heat for a few more seconds.
          12. Remove the paper or vinyl, making sure it is warm or cold.
          13. Your garment is now personalised.

          AS A MUG PRESS

          1. Press the POWER button to start the press.
          2. Press the "MODE" button to activate the mug press mode. If the accessory is not connected, three zeros will show on display.
          3. Press "TEMP" and temperature will start blinking. Then, you can adjust it with "INCREASE" or "DECREASE" until it reaches 100ºC (for low temperature) or 180ºC (for high temperature).
          4. Repeat the process, and select the time needed for your transfer by pressing on the "TIMER" button (up to 120 seconds).
          5. Adjust the pressure by tightening the screws on the handle and place the mug.
          6. Press TIMING button to start the countdown.
          7. You will hear a sound when the timer reaches zero. Press the clock button to stop it.
          8. Peel off the paper making sure it is warm or cold.
          9. Your mug is now personalised.
            Additional Information
            Reference nº 925 594
            Power (W) 850
            Pressure regulation Manual
            Post your question

            Questions and Answers

            There are no entries.

            Heat Press Machine & mug accessory - Brildor Hobby 2 - Manual Description

            More information about the Brildor Hobby 2 manual heat press and its mug accessory

            • Large and ergonomic easy-grip handle.
            • Insulating safety base that keeps it protected when not in use.
            • Precise temperature control.
            • Ceramic-coated heating plate. Evenly heats from edge to edge, achieving optimal and long-lasting transfers.
            • Obtains pressing results in less than 60 seconds.
            • Protection against power surges.
            • The casing of the press is made of white, grey and red non-flammable plastic.
            • Insulating inner material.
            • Digital temperature and time control panel.
            • Also available a mug heater that must be purchased separately. Suitable for mugs up to 11oz.

              TECHNICAL DETAILS

              Press type
              Manual
              Heating plate
              23.5 x 23.5 cm
              Temperature range
              0 - 200ºC
              Temperature accuracy ±5ºC
              Time range 0-300 s
              Heating speed
              5 minutes of preheating to reach maximum temperature
              Power 850W
              Voltage 110V/220V

                IN THE BOX

                Brildor Hobby 2 Manual Press 1
                Safety base 1
                Silicone pad 1
                Teflon sheet 1
                User Guide (English) 1

                  DIMENSIONS (APPROX.)

                  Brildor Hobby 2 manual press
                  Press 24 x 24 x 10 cm
                  Heating plate 23.5 cm x 23.5 cm x 3 mm
                  Safety base 28.6 x 28.6 x 4.5 cm
                  Pad 29 cm x 29.2 cm x 7 mm
                  Teflon sheet 30 x 30 cm
                  Power cable 1.20 m
                  Packaging 39.5 x 34.5 x 22 cm
                  Net weight 3.55 kg
                  Mug accessory
                  Height 12.8 cm
                  Thickness 3 cm
                  Outer diameter 11.1 cm
                  Inner diameter 8.2 cm
                  Press connection cable 47 cm
                  Packaging 19 x 26.5 x 19.5 cm
                  Net weight 1.34 kg

                    User instructions for the Brildor Hobby 2 manual heat press and its mug accessory

                    AS A FLAT HEAT PRESS

                    CONTROL PANEL

                    • POWER. Press to turn the press on or off. For security reasons, the press has an automatic shut down system. After 10 minutes of inactivity, it will emit a sound and shut down. Press any button to cancel the shutdown sequence.
                    • "TEMP". Easy temperature set up. Press and hold the button to change from Fahrenheit to Celsius.
                    • "TIMER". Press it to adjust the time. It can be set up from 0 to 300 seconds.
                    • "INCREASE" or "DECREASE". Press to increase or decrease by a digit. Press and hold to do it faster.
                    • "TIMING". Press this button to start pressing, and time will start counting down. When finished, you will hear a sound. Press the button again to stop it.
                    • "MODE". Hold this button to change between the flat press mode (blue light) and the mug press one (orange light).

                    HOW TO USE IT?

                    1. Press the POWER button to start the press.
                    2. Press the "TEMP" button and temperature will start blinking. Adjust it with "INCREASE" or "DECREASE" until the desired temperature has been reached.
                    3. Repeat the process, and select the time needed for your transfer by pressing on the "TIMER" button.
                    4. Use the included silicone pad as pressing support. Preheat the garment for 3-5 seconds to remove wrinkles and moisture.
                    5. Place the design where you want it on the fabric. You can use heat-resistant tape to hold the paper and prevent it from moving.
                    6. Cover with the Teflon sheet.
                    7. When the temperature reaches the desired value, apply pressure holding the press by its handle until you notice some depth on the pad. You can apply gentle or heavy pressure, depending on the garment you want to print.
                    8. Press on the TIMING button to start the countdown.
                    9. You will hear a sound when the timer reaches zero. Press the clock button to stop it. Lift the press.
                    10. Turn the garment and apply heat for about 10-15 seconds.
                    11. If the paper or vinyl cannot be removed easily, re-apply heat for a few more seconds.
                    12. Remove the paper or vinyl, making sure it is warm or cold.
                    13. Your garment is now personalised.

                    AS A MUG PRESS

                    1. Press the POWER button to start the press.
                    2. Press the "MODE" button to activate the mug press mode. If the accessory is not connected, three zeros will show on display.
                    3. Press "TEMP" and temperature will start blinking. Then, you can adjust it with "INCREASE" or "DECREASE" until it reaches 100ºC (for low temperature) or 180ºC (for high temperature).
                    4. Repeat the process, and select the time needed for your transfer by pressing on the "TIMER" button (up to 120 seconds).
                    5. Adjust the pressure by tightening the screws on the handle and place the mug.
                    6. Press TIMING button to start the countdown.
                    7. You will hear a sound when the timer reaches zero. Press the clock button to stop it.
                    8. Peel off the paper making sure it is warm or cold.
                    9. Your mug is now personalised.

                      Additional Information

                      Reference nº 925 594
                      Power (W) 850
                      Pressure regulation Manual
                      Post your question

                      Questions and Answers

                      There are no entries.

                      The legal stuff about cookies:


                      This message requires us to tell you about ourcookie policy.

                      If you continue browsing, we'll assume you accept it and think it's okay.

                      Don't worry, this message only comes up once.