The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
B → A system: Laser-Dark Low Temp B transfer paper and Forever Flex-Soft A-foil
2-step application: transfer the B-Paper to the printed A-Foil and fix them on the substrate
Made in Germany by Forever
TRANSFER PARAMETERS FROM B-PAPER TO A-FOIL
STANDARD COLOURS
Temperature: 140-155ºC
Pressure: 2-3 bar [medium pressure]
Time: 90 seconds (A4 format) or 120 seconds (A3 format)
METALLIC AND NEON COLOURS
Temperature: 130-135ºC
Pressure: 2-3 bar [medium pressure]
Time: 90 seconds (A4 format) or 120 seconds (A3 format)
APPLICATION INSTRUCTIONS
Print your design in mirror mode on the Flex-Soft A-Foil matte side
Trim the edges of the Flex-Soft A-Foil
Preheat the press to 140-155ºC. Once it reaches that temperature, keep the press closed for at least 30 seconds to ensure that the bottom plate is hot
Cover the bottom plate with protective paper
Place the Flex-Soft-Foil with the printed side facing up and the Laser-Dark B-Paper with the coated side facing down in contact with the foil
Cover both with protective paper
Press at 140-155ºC (standard colours) or 130-135ºC (neon and metallic colours) with high pressure for 90 seconds (A4 format) or 120 seconds (A3 format)
Open the press and remove the protective paper
Rub evenly for 5 seconds
Separate the hot B-Paper from the A-Foil without lifting them from the lower plate. Work in a slow diagonal fluid motion