More information about the Decorative Frosted Glass Film Réflectiv Designs

INDEX

> Description

> Things to keep in mind

> Technical data

> Application instructions

> Storage recommendations

> Weights

> Related posts

DESCRIPTION

Decorative film with designs is a film with designsfrosted or acidic effect film for decorating glass.

• Water activatable adhesive
• Suitable for all types of glass
• Manufactured in France by Réflectiv

THINGS TO KEEP IN MIND

• The glass The surface on which it is applied must be clean, free of dust, grease or any other contaminants
• You can clean it with soapy water at least 30 days after application. Avoid the use of products abrasives or ammonia

TECHNICAL DATA

APPLICATION INSTRUCTIONS

To apply the window film it is necessary to use a this tool set

1. Clean the glass thoroughly using a scraper and a water bottle with soapy water spray
2. Clean the edge from glass with a spatula from rubber y paper
3. Cut the vinyl with a cutter, leaving 2-3 cm more than the size of the glass where it will be placed
4. Dampen the vinyl with slightly soapy water and separate it from the application tape. Use 2 pieces of adhesive tape to facilitate the separation
5. Spray soapy water on the adhesive side of the vinyl to activate it
6. Apply the adhesive side to the inside of the vinyl to activate it
7. Spray the vinyl with soapy water to be able to glide the spatula or squeegee over the vinyl
8. Slide the spatula firmly up and down, from the centre to the edges from right to left
9. Cut the excess vinyl around the edges using a cutter. Leave 2 mm distance between the vinyl and the edge of the surface.
10. Use a spatula to remove air bubbles if any

STORAGE RECOMMENDATIONS

• Protect from excessive humidity and sun exposure
• Store in a place with temperature below 38 ºC
• Can be stored for up to 2 years if recommendations are followed

WEIGHTS

RELATED POSTS

Decorate and protect your windows with self-adhesive vinyl