Colour-Changing Adhesive Vinyl

Colour-Changing Adhesive Vinyl

Sign vinyl that changes colour when exposed to temperatures below 15 ºC.

  • Applicable on smooth, non-porous surfaces
  • Suitable for cutting with a plotter
  • Unit of sale: roll of 30.5 cm x 1.5 m

More information

 

 

Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the Colour-Changing Adhesive Vinyl

INDEX

> Description

> Things to keep in mind

> Dimensions

> Storage recommendations

> Cutting parameters for Silhouette and Cricut plotters

> Application instructions

> Related posts

DESCRIPTION

  • Perfect for original decorations on ceramic mugs, glass cups, aluminium thermoses...
  • Regains its original colour as the temperature rises above 15 ºC
  • PET liner serves as a support for cutting and discarding the vinyl
  • Water-resistant
  • Once applied, it can be easily removed without leaving residues

THINGS TO KEEP IN MIND

  • Should be cut with the plotter on the vinyl side
  • Not suitable for fabrics
  • For application, it is advisable to use a transfer tape for sign making. It is recommended to be transparent and grid-lined to facilitate the placement of the design on the target surface, such as the PT160G Ref.040977

DIMENSIONS

Roll
30.5 cm x 1.5 m
Thickness (mm) 0.26
Core (cm)
Ø2.3
Weight (g) 156

STORAGE RECOMMENDATIONS

  • Store vertically or on roll holders
  • Keep in a place with a temperature between 15 ºC and 25 ºC with a relative humidity of 50-60%

CUTTING PARAMETERS FOR SILHOUETTE AND CRICUT PLOTTERS

The indicated parameters are for guidance. They may vary mainly due to the condition of the blade. It is recommended to conduct preliminary tests and make necessary adjustments.

SILHOUETTE CRICUT

Blade: 8

Force: 4

Speed: 5

Passes: 2

Material: reflective vinyl

Blade: standard

Setting: holographic

Vinyl: glossy

Pressure: default

APPLICATION INSTRUCTIONS

  1. The surface where the vinyl will be applied must be clean and dry
  2. Cut the vinyl in the shape of the design in direct mode
  3. Weed the vinyl, discarding the excess parts. Only the design to be transferred will remain on the liner
  4. Cover it with transfer paper until it adheres to it, then remove the liner
  5. Transfer the design to the target surface. Adhere it gradually, using a squeegee while removing the transfer paper

RELATED POSTS

Adhesive Vinyl Transfer Tape: How to Choose the Right One

Glossary of Terms for Vinyl Cutting

Additional Information
Ref. 950604

Reviews

Share your opinion

It will only take a minute, and your opinion can help other customers.

Log in to your profile, share your opinion, and enter the monthly "Rate & Win" prize draw
0 reviews
5
0
4
0
3
0
2
0
1
0

Questions

No questions found for this product.

Be the first to ask a question!