Tubitherm® Flock Heat Transfer Vinyl from Poli-Tape - Neon colours & white blockout

Tubitherm® flock heat transfer vinyl from Poli-Tape in neon colours and white blockout. With a built-in carrier sheet.

  • Made of polyamide with a velvety feel.
  • Suitable for cotton, polyester/cotton, and natural/synthetic fabrics without water-repellent coating.
  • Sale unit: 1 and 10 m rolls , with a width of 50 cm

More information

Cutting service

Shown on each product
Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the Tubitherm® flock heat transfer vinyl from Poli-Tape - Neon colours and white blockout

  • Designed for applying neon designs on T-shirts, uniforms, sports and leisure garments, sports bags and much more.
  • The white vinyl has a blockout interlayer that provides high opacity. It prevents ink migration, i.e. the colours of the fabric don’t bleed through the vinyl.
  • Excellent peeling and cutting. The material will not tear if the vinyl is quickly removed.
  • Velvety soft touch, similar to peach texture.
  • Suitable for vinyl cutters. You should use a 45º standard blade.


  • OEKO-TEX Standard 100, Product Class 1. Free of PVC, plasticisers and heavy metals.
  • V-Label seal of quality. Labelled as a vegan and vegetarian product by the European Vegetarian Union (EVU).



Composition Polyamide
Adhesive Copolyester (hot melt)
Vinyl thickness 500 µ (0,50 mm) +/-10%
Liner thickness 30 µ (0,03 mm) +/-10%
Backing/Liner Self-adhesive polyester film
Applies on Cotton, polyester/cotton blends, and uncoated natural and synthetic fabrics



  • Wash the garment inside out at a maximum temperature of 40ºC (neon colours) and 60ºC (white blockout).
  • Suitable for tumble drying and dry cleaning.
  • Only use detergent on coloured fabrics.
  • Always follow the washing recommendations of the fabric, as they may be more restrictive than those of this vinyl.

Recommended instructions and application parameters

  • Cut out the design in mirror image with a vinyl cutter and a 45º blade
  • With a hook, remove the excess vinyl leaving on the liner the design you want to apply.
  • Preheat the press to 160ºC.
  • Place the garment on the press’ lower platen and the design on top.
  • Cover with protective paper to protect the vinyl and the fabric.
  • Press for 15 seconds, medium pressure.
  • Remove the liner when hot, but not immediately. Wait until it becomes lukewarm.

(*) We recommend running some tests to adjust the application parameters according to the press you will be using.


More Information
Ref. 919899
Post your question