Flock Heat Transfer Vinyl - Tubitherm

Tubitherm flock heat transfer vinyl from Poli-Tape. With a built-in carrier sheet.

  • Made of viscose-rayon with a velvety touch.
  • Suitable for cotton, polyester/cotton, and natural/synthetic fabrics without water-repellent coating.
  • Sale unit: 1 m and 10 m rolls with widths of 25 cm and 50 cm

More information

Shown on each product
Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the Tubitherm flock heat transfer vinyl

  • Excellent peeling and cutting. The material will not tear if the vinyl is quickly discarded.
  • Velvety soft touch, similar to peach texture.
  • Suitable for vinyl cutters. You should use a 45º standard blade.
  • Compatible with Cricut cutting plotters. Like the SmartMaterials®, they have a carrier sheet on the back that allows the vinyl to be inserted into the plotter, without the need for cutting mats.


  • OEKO-TEX Standard 100, Product Class 1. Free of PVC, plasticisers and heavy metals.
  • V-Label seal of quality. Labelled as a vegan and vegetarian product by the European Vegetarian Union (EVU).



Composition Viscose-rayon
Adhesive Copolyester (hotmelt)
Vinyl thickness 500 µ (0,50 mm) +/-10%
Liner thickness 30 µ (0,03 mm) +/-10%
Backing/Liner Self-adhesive polyester film
Applies on Cotton, polyester/cotton blends, and uncoated natural and synthetic fabrics



  • Wash the garment inside out at a maximum temperature of 40ºC (neon colours) and 60ºC (standard colours).
  • Suitable for tumble drying and dry cleaning.
  • Only use detergent on coloured fabrics.
  • Always follow the washing recommendations of the fabric, as they may be more restrictive than those of this vinyl.

Recommended instructions and application parameters

  • Cut out the design in mirror image with a vinyl cutter and a 60º blade
  • With a hook, remove the excess vinyl leaving on the liner the design you want to apply.
  • Preheat the press to 160ºC
  • Place the garment on the press’ lower platen and the design on top.
  • Cover with protective paper to protect the vinyl and the fabric.
  • Press for 15 seconds, medium pressure.
  • Remove the liner when hot, but not immediately. Wait until it becomes lukewarm.

(*) We recommend running some tests to adjust the application parameters according to the press you will be using.


More Information
Ref. 920045
Post your question