More information about the Craft Express Supports for Personalisation Cylindrical Objects

INDEX

> Description

> Positions by Diameter

> Clamp Holder Usage Instructions

> Measurements

> Related Posts

DESCRIPTION

• The Tumbler Cradle is a Craft Express accessory with a foldable and lightweight design, making it easy to transport.
• Non-slip foam rollers that stabilise cylindrical objects for easy customisation, preventing movement and scratches.
• Pre-printed rulers on the rollers for quick measurements and as a reference point for customisation. Marked in cm and inches, up to 23 cm | 9"
• Stable metal structure. Adjustable in 3 positions, depending on the size of the object.
• Easy to assemble, simply open the holder and secure the lever in the desired position.
• Suitable for almost all types of cylindrical objects, even with curved or irregular shapes.
• Detachable plastic clamp with elastic rings to help securely hold products of Ø7.1, Ø8.2, and Ø10 cm

POSITIONS BY DIAMETER

Guidance for selecting the most suitable holder position based on the size of the object to be customised.

Holder

CLAMP HOLDER USAGE INSTRUCTIONS

1. Adjust the base width to fit the diameter of the object to be customised.
2. Insert the clamps into the metal guide and press them down until fixed.
3. Place the printed design around the product and secure it with heat tape.
4. Position the object on the base and place the clamp on top.
5. Secure the clamp using one of the included elastic rings.
6. Once the design is placed, remove the silicone ring and release the clamp.

MEASUREMENTS

RELATED POSTS

How to customise thermos and bottles with a mug heat press