More information about the plastic sublimation travel mug and its jig

INDEX

> Description

> Things to keep in mind

> Template to personalise this insulated tumbler

> Dimensions

> Recommended instructions and parameters for sublimation printing

DESCRIPTION

• Food grade. BPA free
• Double wall. Consists of a gloss finish inner tumbler, matte finish outer tumbler and lid
• Printable outer tumbler
• Lightweight, durable and reusable. Does not break easily
• The aluminium jig prevents deformation during sublimation. Remove while hot

THINGS TO KEEP IN MIND

• Sublimate only the outer tumbler. Remove the silicone lid and inner tumbler to avoid heat damage
• It is recommended to personalise this tumbler using a 3D oven and insert jig for best results

TEMPLATE TO PERSONALISE THIS INSULATED TUMBLER

• Travel mug template (PSD - 1.05 MB)

DIMENSIONS (APPROX.)

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

• Print the design in mirror image
• Preheat the oven to 180ºC
• Hold the paper's printed side against the tumbler and fix it with heat-resistant tape. Remember to remove the lid and the inner tumbler to avoid damaging them
• Insert the jig inside the tumbler
• Place the tumbler inside a heat shrink bag and create a vacuum with a heat gun
• Sublimate inside the oven for 8-10 minutes
• Remove the newly printed tumbler using a protective glove while hot. If it is not possible to remove it, reheat it for a few minutes at 200ºC
• Dip it in water to cool it down. Carefully remove the bag and the paper from the tumbler
• Insert the inner tumbler and twist it to secure it in place. Put the lid on