The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
More information about TexPrint ThermoTack TT adhesive sublimation paper rolls
Perfect for the sublimation of garments, sportswear, beachwear, tablecloths, face masks or flags.
Compatible with most sublimation ink brands (Epson, InkSub, Sublijet, . . . ).
Suitable for inkjet printers with piezoelectric printheads.
Has a uniform adhesive surface for homogeneous sublimation results.
Maintains image sharpness and colour consistency.
INSTRUCTIONS FOR USE
Print on the adhesive side that you can see on the outside of the roll. It is a little bit shinier and smoother than its non-printable side, which has a more matte and rough finish. If you still have doubts about which one is the adhesive side, moisten both slightly, and you will see that one of them is sticky.
Place the paper, already printed with sublimation inks, on the fabric.
Press with the desired parameters. At the end of the heat transfer process, the paper will be fixed to the fabric and will not move when the plate is raised. It will prevent any ghosting or blurring effect on the sublimated image.
Gently but firmly remove the paper from one end, to prevent it from touching the fabric again.
DIMENSIONS(*)
Reference nº
039079
039078
039076
039080
039077
Paper
33 cm x 75 m
43 cm x 75 m
61 cm x 75 m
111.80 cm x 100 m
137 cm x 150 m
Inner tube
Ø2" ≈ Ø5 cm
Ø2" ≈ Ø5 cm
Ø2" ≈ Ø5 cm
Ø3" ≈ Ø7.6 cm
Ø3" ≈ Ø7.6 cm
Outer diameter
Ø11.5 cm
Ø11.5 cm
Ø12 cm
Ø14.5 cm
Ø16.7 cm
Packaging
----
----
67 x 17 x 13 cm
119 x 19 x 17 cm
144.5 x 18 x 17.3 cm
(*) IMPORTANT NOTE
When selecting a paper roll, you must first determine whether or not it is suitable for the printer that you are using. For this matter, you must consider:
The inner diameter of the roll, to ensure that it can be inserted on the holder the printer has for this purpose.
The outer diameter of the roll, to ensure that its size matches the spot where it should be placed on the printer.