The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
Tube shaped scarf with no side or edge seams. Opening at both ends to insert the head
Printable all over
THINGS TO KEEP IN MIND
Before sublimating the blue, red, pink or green neck warmer, you should bear in mind that these colours will blend with the colours of the image you want to print, changing its tone. Choose designs with dark colours to minimise this effect
DIMENSIONS (APPROX.)
Neck gaiter (cm)
21 x 40
Grammage (gsm)
130
Print area per side (mm)
21 x 40
Pack (cm)
23 x 12.5 x 3.1
WASHING RECOMMENDATIONS
Machine wash at 40ºC maximum. Choose the delicates cycle
Do not use bleach
Iron at 110ºC maximum
Do not dry clean
Air dry
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Print the design in mirror image
Preheat the press to 200ºC
Place protective paper on the inside of the neck gaiter to prevent the ink from transferring and staining it
Place the neck gaiter on the press with the printed design over it. Fix it with heat-resistant tape
Press for 35-55 seconds, medium pressure
With the help of a protective glove, take out the freshly sublimated neck warmer
Carefully peel off the paper
Repeat the same process to sublimate the other side