More information about the coloured inner sublimation mug

INDEX

> Description

> Dimensions (approx.)

> Recommended instructions and parameters for sublimation printing

> Related posts

DESCRIPTION

• Cylindrical body, printable on all its outer area
• Can be personalised with a heat press using 10-11 oz heating elements. Also, with a sublimation oven using clamps, silicone sheets or heat shrink bags
• Box not included. You will find some models in Related Products

THINGS TO KEEP IN MIND

• Orca certification sticker on the base. Easily removable if desired

DIMENSIONS (APPROX.)

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters are given as a guide only. They may vary due to many factors such as the paper used, inks or ambient temperature. Therefore, testing is recommended.

WITH A MUG HEAT PRESS

• Print the design in mirror image
• Preheat the press to 200ºC
• Hold the paper's printed side against the mug and fix it with heat-resistant tape
• Press for 180 seconds, medium-high pressure
• Using a protective glove, remove the newly printed mug
• Carefully take off the paper

WITH A SUBLIMATION OVEN

• Print the design in mirror image
• Preheat the oven to 180ºC
• Hold the paper's printed side against the mug and fix it with heat-resistant tape
• Adjust the wrap around it or slide it into a heat shrink bag and heat it with a heat gun. You can also use a silicone sheet
• Sublimate in the oven for 13-15 minutes
  
• Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used
• Carefully peel off the paper from the mug

RELATED POSTS

How To Print Perfect And Original Mugs