
Sublimation MDF3 Wooden Magnets - Family Series
Wooden magnets with family motifs die-cut and customisable by dye sublimation printing.
- 3 mm thick MDF wood including magnet
- Print area: 95 x 95 mm

Related Products
More information about the Sublimation MDF3 Wooden Magnets - Family Series
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Simple and attractive designs perfect for gift giving at events, celebrations and special days such as Mother's Day, Father's Day or Valentine's Day
- Include magnetic holders with adhesive to attach it to the base of the magnet after the personalisation
- Sublimatable side of gloss white. Rear light or dark brown, depending on the lot
THINGS TO KEEP IN MIND
- The face printable face has a film protector that has to be removed before sublimation. The film of some magnets includes an additional layer of additional paper to further protect its surface. Easily removable
- To prevent the magnet from moving to sublimation paper during the printing you can either use the traditional heat tape or a temporary spray adhesive (see under Related Products)
TIPS AND TRICKS
- They can also be offered as coaster if you do not apply the magnet adhesive
DIMENSIONS
Magnet (cm) |
9,5 x 9,5 |
Thickness (cm) |
0,3 |
Magnetic foil (cm) |
2,4 x 2,4 x 0,15 |
Print area (cm) |
9,5 x 9,5 |
Weight magnet (g) |
26 |
Weight pack (g) |
150 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
- Print the design in mode mirror
- Preheat the press to 180 °C
- Removes the film of clear plastic film protecting the sublimatable surface of the magnet
- Place the magnet on the base of the press and the printed part of the paper on the magnet. Fix them with thermal adhesive tape
- Close the press with medium pressure for 60 seconds
- With the help of a protective glove, remove the magnet from the new printed
- Carefully peel off the paper
- Remove the adhesive sticker from the magnetic holders and stick it on the back from magnet
Ref. | 926413 |
---|---|
Dimensions (mm) | 95 x 95 |
Print area (mm) | 95 x 95 |
Thickness (mm) | 3 |
Surface material | Wood |
Accessory details | Magnet |
Marking techniques | Dye sublimation, Laser engraving |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!