More information about the Sublimable Stainless Steel Tumbler

INDEX

> Description

> Things to keep in mind

> Download template

> Dimensions

> Recommended sublimation instructions and parameters

DESCRIPTION

• Lightweight and durable, not easily breakable
• Conical design with a silver-coloured chrome upper rim
• Glossy white exterior, suitable for sublimation. Glossy silver interior
• Suitable for customisation using a sublimation oven. You can also use 17 oz clamps for tumblers/conical mugs or a vacuum membrane
• Supplied in a white cardboard box

THINGS TO KEEP IN MIND

• Although the interior is rust-resistant, it is not corrosion-resistant. Avoid keeping acidic, fermented or carbonated drinks inside for more than 24 hours. It is advisable to wash after each use

DOWNLOAD TEMPLATE

• White stainless steel sublimation glass template (.psd - 645 Kb)

DIMENSIONS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters are for guidance only. It is recommended to carry out preliminary tests and make any necessary adjustments before starting production.

• Print the design in mirror mode
• Preheat the oven to 180ºC
• Place the printed side of the paper around the tumbler and secure it with heat-resistant tape. Protect the upper rim with protective paper or adhesive tape
• Place the tumbler inside a shrink bag and use a heat gun, avoiding the formation of wrinkles. You can also use a 17 oz clamp for tumblers/conical mugs or a vacuum membrane
• Place the tumbler in the oven for 7 minutes
• With the help of a protective glove, remove the bag or take it out of the clamp, as appropriate
• Carefully remove the paper