Sublimation Foldable Umbrella & Carabiner Handle
Sublimation Foldable Umbrella & Carabiner Handle
Polyester 100% umbrella with cover printable by dye sublimation printing.
- 8 panels with metal windproof ribs
- Print area (panel): 20 x 25 cm
More information about the Sublimation Foldable Umbrella & Carabiner Handle
INDEX
> Instruct ions and parameters from dye sublimation printing recommended
DESCRIPTION
- Compact umbrella with 8 customisable panels, Velcro fastening and flat black cap
- Cane extendable in 2 heights: to 36 cm or 53 cm
- White polyester white, printable all over its surface
- Ergonomic handle in black and white matte finish
- Manual opening and closing
- Anti-wind system with black metal rods and two hinges
TIPS AND TRICKS
- Customise this umbrellas also by means of screen printing or even heat transfer vinyl for more special finishes such as neon metallised or reflective
- You can use a press laptop Cricut EasyPress to sublimate areas of the umbrellas that are difficult to access with a conventional press conventional
| UMBRELLA | |
| Open (cm) | Ø96.5 x 70.5 |
| Closed (cm) | Ø5.5 x 37.5 |
| Handle (cm) | 14.5 x 5.5 x 2.2 |
| Print area (cm) | 20 x 25 |
| HOLSTER | |
| Dimensions (cm) | 22 x 5 x 4 |
| Print area (cm) | 8.5 x 22 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters indicated as a guide only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
WITH A PORTABLE TRANSFER PLATE
- Print the design in mode mirror
- Preheat the press to 200 °C and program 60 seconds
- Place a protective pad on a rigid base
- Fold the ironing rods upwards to umbrellas upwards for easy cleaning
- Place the design on one of the panels and secure it with heat tape
- Place protective paper on top of the design y press for the programmed time by pressing on it with a conventional transfer panel
- Carefully peel off the paper
WITH A CONVENTIONAL TRANSFER PLATE
- Print the design in mode mirror
- Preheat the press to 200 °C
- Place the part of the umbrellas part you want to sublimate on the base of the press and the printed part of the paper on the fabric from panel
- Close the press at medium pressure for 35-45 seconds
- With the help of a protective glove remove the umbrellas from printed
- Carefully peel off the paper
| Ref. | 037250 |
|---|---|
| Print area (mm) | 200 x 250 |
| Colour | White |
| Surface material | Plastic, Tissue |
| Items | Umbrellas |
| Composition | Polyester |
| Accessory details | Matching bag, Carabiner, Foldable, Velcro |
| Marking techniques | Dye sublimation, Screen printing, HTV |
| Height (cm) | 8.3 |
| Width (cm) | 4.4 |
| Length (cm) | 40.0 |
| Gross weight (kg) | 400 |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question