Poli-Flex® Nylon Heat Transfer Vinyl from Poli-Tape

Poli-Flex® Nylon heat transfer vinyl from Poli-Tape suitable for elastic fabrics. Can be used on fabrics on which other films cannot be applied.

  • Made of polyurethane (PU) coated with a thermoplastic adhesive (Hot Melt) and 100 μ thickness.
  • Suitable for nylon, lycra or water-repellent coated fabrics.
  • Sale unit: 1 m, 5 m and 25 m rolls, all of them with a width of 50 cm

More information

Availability:
Shown on each product
Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the Poli-Flex® Nylon heat transfer vinyl from Poli-Tape

  • Recommended for applying designs on elastic and hydrophobised garments, i.e. highly water repellent.
  • Especially useful for nylon garments: tights, leggings, sports bras, jackets, swimming costumes, parkas, anoraks and much more.
  • Available in metallic silver and metallic gold.
  • Multi-layer. It has a Hot Melt coating that makes the adhesive melt and mould to the fabric. Once cold, the vinyl recovers its rigidity and remains attached to the material.
  • Soft touch elastic vinyl. It adapts to the fabric and does not crack when stretched.
  • Suitable for vinyl cutters. You should use a 45º standard blade.
  • Complies with OEKO-TEX Standard 100, Product Class 1. Free of PVC, plasticisers and heavy metals.

DOWNLOAD HERE

TECHNICAL DETAILS

Composition Polyurethane (PU)
Adhesive Polyurethane-hotmelt
Vinyl thickness 100 µm (0.1 mm) ±5%
Backing/Liner Self-adhesive PET film
Applies on Hydrophobic and nylon fabrics

WASHING RECOMMENDATIONS

  • Garments should be washed inside out at a maximum temperature of 60ºC
  • Suitable for tumble drying and dry cleaning.
  • Wash detergent resistant.
  • Always follow the washing recommendations of the fabric, as they may be more restrictive than those of this vinyl.

Recommended instructions and application parameters

  • Cut out the design in mirror image with a vinyl cutter and a 45º blade
  • With a hook, remove the excess vinyl leaving on the liner the design you want to apply.
  • Preheat the press to 150ºC
  • Place the garment on the press’ lower platen and the design on top.
  • Press for 4 seconds, medium pressure.
  • Cover the vinyl with protective paper.
  • Remove the liner when lukewarm.
  • Press again for 10 seconds, medium pressure.

(*) We recommend running some tests to adjust the application parameters according to the press you will be using.

 

More Information
Ref. 921951
Post your question