More information about Sublimable Musical Magnets

INDEX

> Description

> Things to keep in mind

> Instructions for use

> Templates for customisation

> What is included with the musical magnet?

> Technical data

> Dimensions

> Recommended sublimation instructions and parameters

> Related posts

DESCRIPTION

• Ideal as a gift for celebrations such as birthdays, weddings, communions, Valentine’s Day, Mother’s Day, Father’s Day, etc.
• The white side of the glass plates (direct mode) and aluminium plates (mirror mode) can be sublimated
• Rounded corners and edges
• Side buttons to increase/decrease volume
• USB Type-C charging port with light indicator: flashing red light = charging | steady light = battery fully charged

THINGS TO KEEP IN MIND

• The customisable side of the aluminium plate has a transparent protective plastic film that must be removed before sublimating
• The sublimable glass plates are suitable for both magnet models
• The white and black magnets have slight differences in operation

INSTRUCTIONS FOR USE

Recording (white magnets only Ref. 058180)

• Slide the switch to ON
• Press Record to start (a beep will sound)
• Press again to stop recording (two beeps)
• Only one recording can be stored at a time. When a new one is recorded, the previous one is overwritten
• Files are saved as REC001
• To delete: hold down Record for 3 s while playing. You will hear three beeps to confirm deletion

Bluetooth mode

• Press Record twice to activate Bluetooth (“Bluetooth mode”)
• Search for the device on your phone and pair it
• Press Record twice to return to local mode

Replacing music from the computer

• Connect the device to your computer via USB Type-C
• Upload files to the device’s internal folder. Only MP3 format is supported
• If there are already files, delete them before adding new ones

TEMPLATES FOR CUSTOMISATION

To view the keyring template, open the file using Photoshop. Remember to activate the layers:

Sublimable musical magnets (.tif - 4.7MB)

WHAT IS INCLUDED WITH THE MUSICAL MAGNET?

Black Ref. 056681

White Ref. 058180

TECHNICAL DATA

DIMENSIONS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters are for guidance only. It is recommended to carry out preliminary tests to make the necessary adjustments before starting production.

Glass plate

• Print the design in direct mode
• Heat the press to 180 ºC
• Place the glass plate on the base plate of the press and the printed side of the paper on its white side. Secure it with heat-resistant adhesive tape
• Close the press with medium pressure for 120 seconds
• With the help of a protective glove, remove the freshly sublimated glass
• Carefully remove the paper

Aluminium plate

• Print the design in mirror mode
• Remove the protective film from the sublimable side of the plate
• Heat the press to 200 ºC
• Place the plate on the base of the press and the printed side of the paper on the plate
• Close the press at medium pressure for 40 seconds
• With the help of a protective glove, remove the freshly sublimated plate
• Carefully remove the paper

RELATED POSTS

20 BBC gifts: surprise with customisable products for Weddings, Christenings and Communions

Customisable products for Mother’s Day that your shop can’t be without

Customisable products for Father’s Day: original ideas and best sellers

Valentine’s Day: boost your sales with the customisable products your customers are looking for