More information about the Sublimable Locket Necklaces for Engraving

INDEX

> Description

> Things to keep in mind

> Tips and advice

> Measurements

> Recommended sublimation instructions and parameters

DESCRIPTION

• Ideal as a personalised gift for special occasions such as Valentine's Day, anniversaries, birthdays...
• Mirror effect steel lockets
• Link chain with lobster clasp. Same colour as the pendant
• Only the white side of the aluminium plates is sublimable. Silver reverse is not sublimable
• Interior with adhesive to secure the aluminium plates

THINGS TO KEEP IN MIND

• The customisable side of the plates has a protective film that must be removed before sublimating
• It is recommended to carefully fix the plate to the base. Once adhered, it may break if you attempt to remove it
• Acquire suitable packaging for the necklaces in Related Products
  

TIPS AND ADVICE

• You can change the engraving colour with solid wax (See Related Products)

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 200 ºC
• Remove the protective plastic from the white side of the sheet
• Place the sheet on the press and the printed side of the paper on the white side of the sheet. Secure it with thermal adhesive tape
• Close the press with medium pressure for 40 seconds
• With the help of a protective glove, remove the freshly sublimated sheet or plate
• Carefully remove the paper