More information about the Sublimable Glass Photo Panels with Vaulted Edges

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

• Sublimable on the white coating on the reverse. Sides with geometric patterns
• The printed image is visible through the crystal block, creating a 3D effect
• 2 sides of the photo panel have a convex shape
• The base of the stand is U-shaped to securely hold the photo panel, preventing movement
• Presented in a cardboard box

THINGS TO KEEP IN MIND

• The edge of the print area is a gradient zone where the image is not fully visible
• Sublimation in direct mode (not mirrored)

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated are for guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

WITH FLAT TRANSFER PRESS - DIRECT METHOD

• Print the design in direct mode
• Heat the press to 200 ºC
• Secure the printed paper to the white side of the photo panel with heat tape
• Place the photo panel and paper with the sublimable side facing up on the press plate
• Place a silicone pad over the photo panel for even stamping (optional)
• Close the press with medium pressure for 130 seconds
• Using a protective glove, remove the freshly printed photo panel
• Carefully remove the paper

WITH FLAT TRANSFER PRESS - INDIRECT METHOD

• Print the design in direct mode
• Heat the press to 200 ºC
• Place a Nomex pad on the lower plate of the press for even heat distribution
• Secure the printed paper to the white side of the photo panel with heat tape
• Place the photo panel and paper with the sublimable side facing down on the press plate
• Close the press with medium pressure for 900 seconds
• Using a protective glove, remove the freshly printed photo panel
• Carefully remove the paper