More information about the Sublimable Fabric Dummy Holders

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

• Dummy clip strap in optical white satin-like fabric
• Reinforced strap ends. One with X stitching and the other with standard stitching
• End with metal clip to attach to clothing. The other end with elastic to secure the dummy
• Can also be customised with embroidery, DTF, transfer, screen printing, textile vinyl...

THINGS TO KEEP IN MIND

• During sublimation, keep the clip and elastic away from the heat press. The metal can scratch the plates and the strap's elastic could be damaged

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 180 ºC
• Place the part of the strap to be sublimated on the press base and the printed side of the paper on top. You can secure it with heat tape to prevent movement
• Close the press with medium-high pressure for 40 seconds
• Using a protective glove, remove the newly printed dummy clip
• Carefully remove the paper
• Repeat the same process on the other side