More information about the sublimable ceramic cutlery drainer

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended sublimation instructions and parameters

> Related posts

DESCRIPTION

• White, high-gloss finish ceramic containers with high-quality Orca coating
• The holes at the bottom of the containers ensure greater hygiene and less bacterial build-up
• Easy to wash and maintain
• Comes in its original box

THINGS TO KEEP IN MIND

• The cylindrical containers have a protruding rim of 1 cm
• Orca certificate stickers included. They can be removed if desired

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters are for guidance only. It is recommended to carry out prior tests to make the necessary adjustments before starting production.

WITH MUG HEAT PRESS

• Print the design in mirror mode
• Heat the press with a 6-9oz mug heating element to 200 ºC
• Place the printed side of the paper onto the container and secure it with heat-resistant tape
• Close the press at medium-high pressure for 180 seconds
• Remove the freshly printed container using a protective glove
• Carefully remove the paper

WITH SUBLIMATION OVEN

• Print the design in mirror mode
• Heat the sublimation oven to 180 ºC
• Place the printed side of the paper onto the container and secure it with heat-resistant tape
• Place a sublimation oven clamp, a silicone sheet, or shrink wrap around the container to create a vacuum
• Place the container in the oven for 13-15 minutes
• After the process, remove the container using a protective glove
• Carefully remove the paper
  

RELATED POSTS

Sublimation in oven with shrink wrap bags

What are the differences in the quality of sublimation mugs?

Why choose our mug presses?

Tips for getting started with ceramic mug sublimation printing