
Sublimable Aluminium Bottles with 2 Caps
Customisable aluminium bottles for sublimation with 2 included caps:
- Dispenser cap + flat or dome lid
- Ring cap + carabiner
You can purchase additional caps and lids separately.

Related Products
More information about Sublimable Aluminium Bottles with 2 Caps
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Suitable for food consumption. Does not transfer taste to the beverage
- Cylindrical aluminium body with a glossy white sublimation coating
- Both bottles include a ring cap + carabiner and a dispenser. The only difference is in the lid: dome (Ref. 038066) or flat (Ref. 055364)
- Screw caps with silicone anti-leak seal
- Wide mouth for easy filling and cleaning
- The carabiner is very useful for hanging the bottles on bags or belts
- Lightweight and durable
- Presented in a white cardboard box
- The bottles can also be customised using other techniques such as laser engraving, screen printing, adhesive vinyl, transfer, DTF, and UV printing
THINGS TO KEEP IN MIND
- You can purchase caps and lids separately. Available in Related Products
- The cap and lid should be removed before sublimation
- Not recommended for dishwasher use
MEASUREMENTS
Reference | 055364 | 038066 |
Bottle (cm) | Ø7 x 18.5 | Ø7 x 18.5 |
Capacity (oz ≈ ml) | 19 ≈ 550 | 19 ≈ 550 |
Print area (cm) | 11.5 x 22.7 | 12 x 23 |
Mouth (cm) | Ø3.5 | Ø3.5 |
Presentation box (cm) | 7.5 x 19.8 x 7.5 | 7.5 x 20.2 x 7.5 |
Weight (g) | 136 | 130 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters indicated as guidelines. It is recommended to perform preliminary tests to make necessary adjustments before starting production.
MUG PRESS
- Print the design in mirror mode
- Heat the press to 180 °C
- Remove the caps from the bottle
- Place the printed design around the bottle and secure it with heat-resistant tape
- Fit the bottle with a suitable resistance and then insert it into the mug press
- Close the press with medium pressure for 65 seconds
- Using a protective glove, remove the freshly sublimated bottle
- Carefully remove the paper
SUBLIMATION OVEN
- Print the design in mirror mode
- Heat the oven to 180 °C
- Remove the caps from the bottle
- Place the printed design around the bottle and secure it with heat-resistant tape
- Place and adjust the clamp or insert the bottle into a shrink wrap bag and shrink it with a heat gun. You can also use a silicone sheet
- Place the bottle in the oven for 7 minutes
- Using a protective glove, remove the clamp, silicone sheet, or shrink wrap bag, as applicable
- Carefully remove the paper from the bottle
Ref. | 952649 |
---|---|
Colour | White/Black |
Surface material | Aluminium |
Items | Bottles |
Accessory details | Carabiner, Cap |
Marking techniques | Dye sublimation |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!