More information about Printable Textile Vinyl - Turbo Print 4037 UV by Poli-Tape

INDEX

> Description

> Things to keep in mind

> Technical data

> Transfer parameters

> ICC profiles

> Application instructions

> Wash resistance

> Weights

> Related posts

> Technical sheet

> Safety data sheet

DESCRIPTION

TURBO PRINT 4037 UV is a thermo-adhesive printable PU (polyurethane) film for textile transfer on cotton, polyester, polyester-cotton, polyester-acrylic, and non-waterproof nylon fabrics.

• Printable on the matte side
• Compatible with all UV printers
• The 10-metre roll has a cardboard core of Ø7.5 cm
• The raw materials used are eco-friendly, containing no PVC, plasticisers, or heavy metals
• Manufactured in Germany by Poli-Tape

THINGS TO KEEP IN MIND

• To facilitate the placement of the vinyl on the garment, we recommend using the Poli-Tack 854 or Poli-Tack 870 transfer tape, see Related Products

TECHNICAL DATA

TRANSFER PARAMETERS

COTTON, POLYESTER, POLYESTER-COTTON, AND POLYESTER-ACRYLIC

Can be applied at different temperatures:

• Temperature - Time:
  • 130 ºC - 5 seconds
  • 150 ºC - 4 seconds
  • 160 ºC - 3 seconds
• Pressure: 2.5 - 3.0 bar [medium pressure]
• Pre-pressing the garment: 4-5 seconds

NYLON

• Temperature: 150 ºC
• Pressure: 2.0 bar [low pressure]
• Transfer time: 5 seconds
• Fixation time: 10 seconds
• Pre-pressing the garment: 150 ºC, 4-5 seconds

ICC PROFILES

ICC profiles for detailed vinyl printing settings

APPLICATION INSTRUCTIONS

COTTON, POLYESTER, POLYESTER-COTTON, AND POLYESTER-ACRYLIC

• Print the design on the matte side in direct mode
• Cut it with a plotter
• Remove the excess vinyl (weeding)
• Place the garment on the press and pre-press for 4-5 seconds to remove wrinkles and moisture from the fabric
• Place the vinyl on the garment
• Press at 130 ºC (5 seconds), 150 ºC (4 seconds), or 160 ºC (3 seconds) with medium pressure
• Remove the liner when warm

NYLON

• Print the design on the matte side in direct mode
• Cut it with a plotter
• Remove the excess vinyl (weeding)
• Heat the press to 150 ºC
• Place the garment on the press and pre-press for 5 seconds to remove wrinkles and moisture from the fabric
• Place the vinyl on the garment
• Press with low pressure for 4-5 seconds
• Remove the liner when warm
• Cover with protective paper and press at 150 ºC for 10 seconds with low pressure

WASH RESISTANCE

• Wash resistance: max. 60 ºC
• Only use colour or mild detergents
• Wash the garment inside out
• Iron the garment inside out
• Suitable for tumble drying (up to 100 ºC)

WEIGHTS

RELATED POSTS

Complete guide on printable textile vinyl

TECHNICAL SHEET

We have adapted the formats to our customers' needs, and these may not match those listed in the following safety sheet, prepared by the manufacturer.

Turbo Print 4037 UV Technical Sheet (.pdf - 0.04 MB)

SAFETY DATA SHEET

Proper handling of this product will not lead to the formation or release of hazardous components. This product is not classified as dangerous goods under current GefStoffV legislation or EU criteria. Therefore, the preparation of a safety data sheet is not mandatory. The safety data sheet is only provided to meet the informational requirements under regulation (EC) No. 1907/2006 (REACH) and can be sent upon request. This product is not classified as dangerous goods under transport legislation and does not contain high-risk liquid substances, complying with household health regulations. Waste generated from the application and end-of-life cycle of the product must comply with the legal disposal standards of the respective national authorities.