Its adhesive is resistant to high temperatures, ageing and UV rays. It can be removed without residue even after long periods of usage
Made in Germany by Poli-Tape
It includes a silicone liner that allows you to cut the vinyl to the size you want and use it at another time without losing effectiveness. This liner is textured, which will help you remove the design without much difficulty
Reusable, although the durability depends on the care against dust, heat or humidity
When using the transfer tape with sublimation vinyls, remember that its polyester composition could transfer the ink. To avoid this, we recommend pressing it for a short amount of time, removing the transfer tape from the vinyl, and finishing the transfer by pressing it again

TIPS & TRICKS

Wait for the printed ink to dry completely before putting on the application tape to avoid migration and ensure bonding
Store the rolls properly so they don't lose their efficiency, and the adhesive does not get damaged
Use a scraper to press down firmly on each part that must stick to the transfer tape. This will ensure that the vinyl is properly attached to the transfer tape

COMPARISON TABLE

Refer to the following comparison table to select the one that suits you best.

Ref. Poli-Tape	POLI-TACK 870 UNIVERSAL	POLI-TACK 853	POLI-TACK 854	POLI-TACK 850
Ref. Brildor	50 cm x 1 m - 038593 50 cm x 5 m - 039591 50 cm x 25 m - 039592 152 cm x 25 m - 039587	50 cm x 1 m - 049234 50 cm x 5 m - 049231 50 cm x 25 m - 049224	50 cm x 1 m - 049235 50 cm x 5 m - 049226 50 cm x 25 m - 049223	50 cm x 1 m - 049233 50 cm x 5 m - 049232 50 cm x 25 m - 049225
Adhesion (N/cm)	MEDIUM 0.50 +/-10%	LOW 0.30 +/-10%	MEDIUM 0.60 +/-10%	HIGH 0.90 +/-10%
Use	Flex	Flock and Flex	Flock and Flex	Flock and Flex
Clear	Clear	Clear	Clear	Clear
Material	Polyester PET film	Polyester PET film	Polyester PET film	Polyester PET film
Self-adhesive	Acrylic	Acrylic	Acrylic	Acrylic
Thickness	120µ (0.12 mm) +/-5%	120µ (0.12 mm) +/-5%	120µ (0.12 mm) +/-5%	140µ (0.14 mm) +/-5%
Liner	White polypropylene silicone	White polypropylene silicone	White polypropylene silicone	White polypropylene silicone
Gross roll weight (Kg)	0.136 - 038593 0.79 - 039591 3.41 - 039592 10.23 - 039587	0.136 - 049234 0.79 - 049231 3.41 - 049224	0.136 - 049235 0.79 - 049226 3.41 - 049223	0.136 - 049233 0.79 - 049232 3.41 - 049225

INSTRUCTIONS FOR USE

The following are general guidelines which may vary slightly depending on the transfer tape and vinyl you are using:

Discard the trimmed vinyl
Glue the carrier onto the vinyl with the help of a scraper, pressing from the centre outwards to avoid wrinkles
Pre-press the fabric to eliminate humidity
Place the vinyl with the thermal side against the fabric
Press it once, following the vinyl's parameters
Open the press and hot peel the transfer tape
Place protective paper, and press one more time to fix it properly

Transfer tape is reusable multiple times over, although this depends on the adhesion and the condition of the material.

DATA SHEETS

We have adapted the formats to the needs of our customers and these may not match those listed in the following data sheets, provided by the manufacturer.

SAFETY DATA SHEET

Safety data sheet application tape from Poli-Tape (.pdf - 0.72 MB)

Additional Information

More Information
Ref.	944680

Questions And Answers

Post your question