Printable Inkjet Textile Vinyl - Poli-Flex 4600 by Poli-Tape
Printable vinyl for inkjet printers using water-based dye inks, pigmented inks, and most eco-solvent inks.
- Made of white polyurethane
- Suitable for light and dark textiles without water-repellent impregnation
- Available in rolls of 1 m, 5 m, and 25 m with widths of 50 cm, 100 cm, and 152 cm
More information about Poli-Tape's inkjet printable textile vinyl - Poli-Flex 4600
INDEX
DESCRIPTION
POLI-FLEX 4600 is a PU film (polyurethane) thermo-adhesive printable (white, 160 μ) for textile transfer.
- The support or liner is a siliconised paper of 137 g/m2
- Printable on the opaque side
- Manufactured in Germany by Poli-Tape
THINGS TO KEEP IN MIND
- You can apply a layer of Poli-Finish laminate if you want to give the design a glossy finish. Alternatively, you can also use siliconised paper
- The vinyl is distinguished from the liner by being thinner. The liner is a thick paper
- To facilitate the placement of the vinyl on the garment, we recommend using the Poli-Tack 853 transfer tape, see Related Products
- After printing the vinyl with the ink, it should be left to dry. It can be transferred to the garment when the ink is dry to the touch
- The manufacturer recommends conducting preliminary tests with your eco-solvent ink before printing
PARAMETERS
- Temperature: 160 ºC
- Pressure: 2.5 - 3.0 bar [medium pressure]
- Time: 15 seconds
APPLICATION INSTRUCTIONS
- Print the design on the opaque side in direct mode
- Let the ink dry
- When it is dry to the touch, cut the vinyl with a plotter
- Remove the excess vinyl (weeding operation)
- Adhere the Poli-Tack 853 transfer tape with the help of a squeegee
- Heat the press to 160 ºC
- Place the garment on the press and pre-press for 4-5 seconds to remove wrinkles and moisture from the textile
- Place the vinyl on the garment
- Press with medium pressure for 15 seconds
- Remove the transfer sheet while hot
- Remove the liner from the vinyl
- If you want to give it a glossy finish, place a piece of laminate over the design and protective paper on top
- Press with medium pressure for 15 seconds
- Open the press and remove the laminate
WASH RESISTANCE
- Wash resistance: max. 60 ºC
- Only mild or colour detergents
- Wash the garment inside out
- Iron the garment inside out
- Suitable for tumble drying
RELATED POSTS
Complete guide on printable textile vinyl
How to use inkjet vinyl on t-shirts
TECHNICAL DATA SHEET
Technical data sheet of the printable inkjet vinyl Poli-Flex 4600 (.pdf - 0.06 MB)
SAFETY DATA SHEET
Proper handling of this product will not result in the formation or release of hazardous components. This product is not classified as dangerous goods under current GefStoffV legislation or under European Union criteria. Therefore, the preparation of a safety data sheet is not mandatory in this case. The safety data sheet is only provided to meet the informational requirements under statute (EC) No. 1907/2006 (REACH) and can be sent upon request. This product is neither classified as dangerous goods under transport legislation nor composed of high-risk liquid substances, complying with household health regulations. Waste generated from the application and end-of-life cycle of the product must comply with the legal disposal standards of the respective national authorities.
| Ref. | 916163 |
|---|
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question