Poli-Flex Turbo Heat Transfer Vinyl - 25cm x 1m roll

Poli-FlexTurbo HTV made of eco-friendly polyurethane with a heat-activated adhesive and a built-in carrier sheet. Its reduced format allows you to work on all kinds of crafts and small jobs.

  • Suitable for fast application at low temperature
  • Excellent opacity with “blockout” technology. In other words, the colours of the fabric do not bleed through the vinyl
  • Can be used on cotton, polyester, impregnated fabrics (nylon) and their blends
  • Sale unit: 25 cm x 1 m roll

More information

Availability:
Shown on each product
Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the Poli-Flex Turbo heat transfer vinyl in 25 cm x 1 m rolls

  • Suitable for fast applications at lower temperatures on T-shirts, sportswear, sports bags and promotional items in general
  • Very soft to the touch and comfortable to use
  • The liner is easily identifiable by the brighter side of the vinyl
  • Complies with OEKO-TEX 100 ecology and health standards

 

TECHNICAL DETAILS

Material Eco-friendly polyurethane
Thickness 95 µ (0.095 mm) ± 5%
Applies on Cotton, polyester, impregnated textiles and their blends
Cutting blade 45º (standard)
Cutting mode Mirrored

 

Recommendations for use and application

  • Can be cut with any vinyl cutter. We recommend using a standard 45º blade
  • For Silhouette vinyl cutters, you can use the following parameters: blade setting 3, speed 5, force 10
  • After the transfer, warm peel the liner, except for neon colours which must be removed lukewarm. The liner is included with the vinyl itself. You won't need to buy it separately, or even to apply it, as it is already attached to it
  • You can press one on top of the other to create more complex designs, except for the metallic and neon colours
  • It is recommended to run some preliminary tests to make sure the recommended parameters are the right ones
  • Personalised garments should be washed inside out at 60ºC maximum
  • Suitable for dry cleaning
  • Made of ecologically inert materials. Free of PVC, plasticisers and heavy metals
  • The instructions given are based on our knowledge and tests carried out with our equipment, which is why we always recommend you test it yourself to determine the best parameters for each case
  • Due to the many factors that can influence the application of this product, as well as the washing conditions, we can only respond to incidences of unhandled material

 

APPLICATION ON COTTON, POLYESTER AND BLENDED FABRICS (Polyester/Cotton or Polyester/Acrylic)

 

Professional heat press
Temperature Time Pressure
130 °C 5 s 2.5 - 3 bar (medium-low pressure)
150 °C 4 s 2.5 - 3 bar (medium-low pressure)
160 °C 3 s 2.5 - 3 bar (medium-low pressure)

 

Iron  
Temperature Time
Wool setting (**) 5 - 10 s

 

APPLICATION ON IMPREGNATED TEXTILES (Nylon)

Professional heat press
Temperature Pressing time Pressure
Before the transfer During the transfer(*)
150ºC 5 s 5 s 2 bar (low pressure)

(*) After the transfer, remove the carrier sheet and apply silicone paper for 10 seconds

 

Iron
Temperature Pressing time
Before the transfer During the transfer(*)
Wool setting (**) 5 s 5 - 10 s

(*) After the transfer, remove the carrier sheet and apply silicone paper for 10 seconds

 

COLOUR CARD

Colour card Poli-Flex Turbo (pdf - 0.96 MB)

 

DATA SHEET

Data sheet Poli-Flex Turbo (.pdf - 0.36 kB)

More Information
Ref. 923591
Post your question