Search
Matte Heat Transfer Vinyl - Poli-Flex Premium
Poli-Flex Premium HTV from Poli-Tape, with high elasticity and excellent adhesion. With a blockout interlayer and a self-adhesive liner.
- Made of environmentally friendly cast polyurethane (PU) with a matte finish and a thickness of 100 µm
- Suitable for cotton, polyester/cotton or polyester/acrylic fabrics, provided they are not water-repellent coated.
- Sale unit: 1 m, 2 m, 5 m and 25 m rolls with a width of 50 cm
Availability:
Shown on each product
Please, give us an estimate of the quantity you need:
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program
Cómo Estampar Vinilo Textil en VARIOS COLORES
Related Products
More information about matte heat transfer vinyl Poli-Flex Premium
- With a “blockout” interlayer offering high opacity. It prevents ink migration, i.e. the colours of the fabric don’t bleed through the vinyl.
- Soft, pleasant to the touch.
- Matte surface with no reflections.
- Can be cut with any vinyl cutter.
- Complies with OEKO-TEX Standard 100, Product Class 1. Free of PVC, plasticisers and heavy metals.
DOWNLOAD HERE
- Colour card for Poli-Flex Premium HTV (.pdf - 312 kB).
- Data sheet for Poli-Flex Premium HTV (.pdf - 639 kB).
- Pantone reference list for Poli-Flex HTV (.pdf - 620 kB).
TECHNICAL DETAILS
| Composition | Polyurethane (PU) |
| Adhesive | Polyurethane-hotmelt |
| Vinyl thickness | 100 µm (0.1 mm) ±5% |
| Backing/Liner | Self-adhesive PET film |
| Applies on | Cotton, polyester/cotton or polyester/acrylic fabrics without water-repellent coating |
WASHING RECOMMENDATIONS
- Garments should be washed inside out at a maximum temperature of 80ºC
- Suitable for tumble drying and dry cleaning.
- You may use bleach and solvents.
- Always follow the washing recommendations of the fabric, as they may be more restrictive than those of this vinyl.
Recommended instructions and application parameters
- Cut out the design in mirror image with a vinyl cutter.
- With a hook, weed the excess vinyl leaving on the liner the design you want to apply.
- Preheat the press to 160ºC.
- Place the garment on the press’ lower platen and the design on top.
- Cover with protective paper to protect the vinyl and the fabric.
- Press for 15 seconds, medium pressure.
- Cover the vinyl with protective paper.
- Warm peel the liner.
(*) We recommend running some tests to adjust the application parameters according to the press you will be using.
| Ref. | 919796 |
|---|
Post your question